[Sat Jun  8 09:54:33 2013] Detection parameters:
  Position = (385.6, 428.9) = 11 17 50.79 7 57 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 984.4 +/- 35.9
  Background counts = 17.2
  Rate = 0.02 +/- 0.0006

[Sat Jun  8 09:54:34 2013] Off-axis axis estimate = 11.38'
[Sat Jun  8 09:55:08 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 09:55:08 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Sat Jun  8 09:55:08 2013] source mask rpix=2.8, npix_max = 43, mask sum = 38, frac = 0.880
[Sat Jun  8 09:55:08 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.12"
[Sat Jun  8 09:55:08 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun  8 09:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2.csv
[Sat Jun  8 09:55:08 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun  8 09:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2.csv
[Sat Jun  8 09:55:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:09 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  8 09:55:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  8 09:55:09 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  8 09:55:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  8 09:55:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:39 2013] Spatial fit model total counts = 1411.170000, observed total counts = 1062.000000
[Sat Jun  8 09:55:39 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 09:55:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:39 2013] Assessing source extent using major
[Sat Jun  8 09:55:39 2013] Source does appear to be extended
[Sat Jun  8 09:55:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:56:00 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:56:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 09:56:00 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Sat Jun  8 09:56:00 2013] source mask rpix=2.8, npix_max = 43, mask sum = 38, frac = 0.880
[Sat Jun  8 09:56:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.12"
[Sat Jun  8 09:56:00 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  8 09:56:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 09:56:00 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  8 09:56:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 09:56:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:01 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  8 09:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  8 09:56:01 2013] fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  8 09:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  8 09:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:29 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.232612 pixels away
[Sat Jun  8 09:56:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:29 2013] Assessing source extent using major
[Sat Jun  8 09:56:29 2013] Source does appear to be extended
[Sat Jun  8 09:56:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:57:16 2013] XMMSAS src. selection expression = ellipse(33497.834991, 37267.756226, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 09:57:16 2013] Not overwriting source region fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src.reg
[Sat Jun  8 09:57:16 2013] Extracting stamp from image fullrun_mos2_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (348, 391) - (423, 466)
[Sat Jun  8 09:57:16 2013] XMMSAS bgd. selection expression = annulus(33497.834991, 37267.756226, 1087.500000, 2175.000000, X, Y)
[Sat Jun  8 09:57:16 2013] Writing fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20.gif
[Sat Jun  8 09:57:18 2013] ../../xmm0082340101/products/events/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0082340101/products/events/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:19 2013] Mean detx,y = (12810.72, -8679.07) 
[Sat Jun  8 09:57:19 2013] ../../xmm0082340101/products/images/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0082340101/products/images/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:19 2013] ../../xmm0082340101/products/spectra/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:19 2013] Setting source spectrum file to fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jun  8 09:57:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jun  8 09:57:19 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Jun  8 10:09:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 10:09:15 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:47:21 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:21 2013] Total counts from fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 991.00
[Sat Jun  8 10:47:21 2013] Total counts from fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 635.00
[Sat Jun  8 10:47:21 2013] Got source and background scale factors 833332.000000, 5767933.000000
[Sat Jun  8 10:47:21 2013] User source parameters:
  Position = (385.6, 428.9) = 11 17 50.79 7 57 9.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 899.3 +/- 32.5
  Background aperture counts = 91.7
  Rate = 0.01 +/- 0.0005

[Sat Jun  8 10:47:21 2013] Updating counts from extracted products
[Sat Jun  8 10:47:21 2013] Set source signif. to 899.26/9.58 = 93.89
[Sat Jun  8 10:47:29 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:29 2013] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20.arf
[Sat Jun  8 10:47:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:29 2013] Updating source flux to 8.2e-13
[Sat Jun  8 10:47:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:47:46 2013] xmm0082340101/analysis//spectral/fullrun_mos2_xmm0082340101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete