[Sat Jun  8 09:54:32 2013] Detection parameters:
  Position = (312.6, 198.4) = 11 18 12.15 7 40 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.0 +/- 12.8
  Background counts = 21.5
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 09:54:32 2013] Off-axis axis estimate = 7.33'
[Sat Jun  8 09:55:06 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat Jun  8 09:55:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.723
[Sat Jun  8 09:55:06 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.09"
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:32 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.848060 pixels away
[Sat Jun  8 09:55:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:32 2013] Assessing source extent using major
[Sat Jun  8 09:55:32 2013] Source does appear to be extended
[Sat Jun  8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:58 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat Jun  8 09:55:58 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.723
[Sat Jun  8 09:55:58 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.09"
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun  8 09:55:59 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:21 2013] Spatial fit model total counts = 304.671000, observed total counts = 282.000000
[Sat Jun  8 09:56:21 2013] Offset between fit and detection position for source 39 = 1.109798 pixels
[Sat Jun  8 09:56:21 2013] 308.487500 total counts/ 268.082000 bgd. counts: snr = 2.467781
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.109798 pixels
  Position = (312.3, 199.4) = 11 18 12.24 7 40 30.4
  Extent = 3.6" x 3.1", rotation angle = 339
  Source counts = 40.4 +/- 17.6
  Background counts = 268.1
  Rate = 0.0006 +/- 0.0003
[Sat Jun  8 09:56:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:21 2013] Assessing source extent using major
[Sat Jun  8 09:56:21 2013] Source does appear to be extended
[Sat Jun  8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.16
[Sat Jun  8 09:57:10 2013] XMMSAS src. selection expression = ellipse(27124.960570, 17303.391943, 214.657357, 184.922787, 338.967659, X, Y)
[Sat Jun  8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src.reg
[Sat Jun  8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (300, 187) - (325, 212)
[Sat Jun  8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(27124.960570, 17303.391943, 357.762261, 715.524522, X, Y)
[Sat Jun  8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39.gif
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Mean detx,y = (6900.90, 1256.44) 
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Jun  8 09:57:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:16 2013] Not generating rmf since there are only 40 counts
[Sat Jun  8 09:57:16 2013] rmf not generated due to insufficient counts
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39.arf exists, delete to re-create
[Sat Jun  8 10:47:13 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 71.00
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 157.00
[Sat Jun  8 10:47:13 2013] Got source and background scale factors 110724.000000, 996200.000000
[Sat Jun  8 10:47:13 2013] User source parameters:
  Position = (312.3, 199.4) = 11 18 12.24 7 40 30.4
  Extent = 3.6" x 3.1", rotation angle = 339
  Source aperture counts = 53.6 +/- 9.5
  Background aperture counts = 17.4
  Rate = 0.0009 +/- 0.0002

[Sat Jun  8 10:47:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:20 2013] Using photon index=1.80, rate=0.000648, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39.arf
[Sat Jun  8 10:47:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:20 2013] Updating source flux to 1.5e-14
[Sat Jun  8 10:47:33 2013] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete