[Sat Jun  8 09:54:32 2013] Detection parameters:
  Position = (224.0, 229.3) = 11 18 38.10 7 42 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.4 +/- 16.4
  Background counts = 24.4
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 09:54:32 2013] Off-axis axis estimate = 7.37'
[Sat Jun  8 09:55:06 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Sat Jun  8 09:55:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Sat Jun  8 09:55:06 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.11"
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun  8 09:55:07 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun  8 09:55:32 2013] Spatial fit model total counts = 358.297000, observed total counts = 333.000000
[Sat Jun  8 09:55:32 2013] Offset between fit and detection position for source 35 = 0.081557 pixels
[Sat Jun  8 09:55:32 2013] 371.194000 total counts/ 268.438000 bgd. counts: snr = 6.271699
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.081557 pixels
  Position = (224.0, 229.4) = 11 18 38.10 7 42 40.8
  Extent = 4.5 (3.5-5.5)", rotation angle = 0
  Source counts = 102.8 +/- 19.3
  Background counts = 268.4
  Rate = 0.002 +/- 0.0003
[Sat Jun  8 09:55:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:32 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 09:55:32 2013] Source does appear to be extended
[Sat Jun  8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 4.45"
[Sat Jun  8 09:55:58 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.970
[Sat Jun  8 09:55:58 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.45"
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:21 2013] Spatial fit model total counts = 363.129000, observed total counts = 326.000000
[Sat Jun  8 09:56:21 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 09:56:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 09:56:21 2013] Source does appear to be extended
[Sat Jun  8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:57:10 2013] XMMSAS src. selection expression = ellipse(19436.320200, 19911.686200, 267.094808, 267.094808, 0.000000, X, Y)
[Sat Jun  8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun  8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (209, 214) - (239, 245)
[Sat Jun  8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(19436.320200, 19911.686200, 445.158013, 890.316026, X, Y)
[Sat Jun  8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35.gif
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Mean detx,y = (1234.03, 7066.34) 
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jun  8 09:57:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35.rmf exists, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Sat Jun  8 10:47:13 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 140.00
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 162.00
[Sat Jun  8 10:47:13 2013] Got source and background scale factors 228464.000000, 1422410.000000
[Sat Jun  8 10:47:13 2013] User source parameters:
  Position = (224.0, 229.4) = 11 18 38.10 7 42 40.8
  Extent = 4.5 (3.5-5.5)", rotation angle = 0
  Source aperture counts = 114.0 +/- 12.9
  Background aperture counts = 26.0
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 10:47:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:20 2013] Using photon index=1.80, rate=0.00165, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35.arf
[Sat Jun  8 10:47:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:20 2013] Updating source flux to 3e-14
[Sat Jun  8 10:47:33 2013] Flag p found in src. 35 procflags, skipping spectral fitting
[Sat Jun  8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete