[Sat Jun  8 09:54:31 2013] Detection parameters:
  Position = (339.7, 293.2) = 11 18 4.23 7 47 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.2 +/- 18.8
  Background counts = 23.4
  Rate = 0.004 +/- 0.0004

[Sat Jun  8 09:54:32 2013] Off-axis axis estimate = 3.02'
[Sat Jun  8 09:55:06 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jun  8 09:55:06 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.157
[Sat Jun  8 09:55:06 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.94"
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun  8 09:55:07 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun  8 09:55:32 2013] Spatial fit model total counts = 482.998000, observed total counts = 483.000000
[Sat Jun  8 09:55:32 2013] Offset between fit and detection position for source 24 = 1.143068 pixels
[Sat Jun  8 09:55:32 2013] 478.569000 total counts/ 267.797000 bgd. counts: snr = 12.879828
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.143068 pixels
  Position = (339.3, 294.3) = 11 18 4.34 7 47 23.1
  Extent = 8.6 (7.3-10.2)", rotation angle = 0
  Source counts = 210.8 +/- 21.9
  Background counts = 267.8
  Rate = 0.003 +/- 0.0004
[Sat Jun  8 09:55:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:32 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 09:55:32 2013] Source does appear to be extended
[Sat Jun  8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat Jun  8 09:55:58 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Sat Jun  8 09:55:58 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.64"
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:21 2013] Spatial fit model total counts = 380.075000, observed total counts = 485.000000
[Sat Jun  8 09:56:21 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 09:56:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 09:56:21 2013] Source does appear to be extended
[Sat Jun  8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:57:10 2013] XMMSAS src. selection expression = ellipse(29474.732800, 25557.665000, 518.398815, 518.398815, 0.000000, X, Y)
[Sat Jun  8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun  8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (310, 265) - (369, 324)
[Sat Jun  8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(29474.732800, 25557.665000, 863.998025, 1727.996050, X, Y)
[Sat Jun  8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24.gif
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Mean detx,y = (442.21, -4418.61) 
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun  8 09:57:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24.rmf exists, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24.arf exists, delete to re-create
[Sat Jun  8 10:47:13 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 326.00
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 869.00
[Sat Jun  8 10:47:13 2013] Got source and background scale factors 848780.000000, 6892004.000000
[Sat Jun  8 10:47:13 2013] User source parameters:
  Position = (339.3, 294.3) = 11 18 4.34 7 47 23.1
  Extent = 8.6 (7.3-10.2)", rotation angle = 0
  Source aperture counts = 219.0 +/- 19.1
  Background aperture counts = 107.0
  Rate = 0.004 +/- 0.0003

[Sat Jun  8 10:47:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:20 2013] Using photon index=1.80, rate=0.00338, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24.arf
[Sat Jun  8 10:47:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:20 2013] Updating source flux to 4.5e-14
[Sat Jun  8 10:47:33 2013] Flag p found in src. 24 procflags, skipping spectral fitting
[Sat Jun  8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete