[Sat Jun  8 09:54:31 2013] Detection parameters:
  Position = (353.8, 340.1) = 11 18 0.10 7 50 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 11.9
  Background counts = 21.8
  Rate = 0.002 +/- 0.0003

[Sat Jun  8 09:54:32 2013] Off-axis axis estimate = 5.02'
[Sat Jun  8 09:55:06 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Sat Jun  8 09:55:06 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Sat Jun  8 09:55:06 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.94"
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:08 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Jun  8 09:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jun  8 09:55:08 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Jun  8 09:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jun  8 09:55:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:32 2013] Warning, spatial fit 29 centroid is now closest to src. 16
[Sat Jun  8 09:55:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:32 2013] Assessing source extent using major
[Sat Jun  8 09:55:32 2013] Source does appear to be extended
[Sat Jun  8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:58 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Sat Jun  8 09:55:58 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Sat Jun  8 09:55:58 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.94"
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:00 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun  8 09:56:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun  8 09:56:00 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun  8 09:56:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun  8 09:56:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:21 2013] Spatial fit model total counts = 255.463000, observed total counts = 225.000000
[Sat Jun  8 09:56:21 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 09:56:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:21 2013] Assessing source extent using major
[Sat Jun  8 09:56:21 2013] Source does appear to be extended
[Sat Jun  8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:57:10 2013] XMMSAS src. selection expression = ellipse(30733.187500, 29539.449158, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (316, 303) - (391, 378)
[Sat Jun  8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(30733.187500, 29539.449158, 1087.500000, 2175.000000, X, Y) && !ellipse(29461.433777, 30366.737701, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17.gif
[Sat Jun  8 09:57:12 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:12 2013] Mean detx,y = (-2625.36, -7315.89) 
[Sat Jun  8 09:57:12 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:12 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:12 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  8 09:57:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun  8 09:57:12 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:16 2013] Not generating rmf since there are only 64 counts
[Sat Jun  8 09:57:16 2013] rmf not generated due to insufficient counts
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Sat Jun  8 10:47:16 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:16 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 182.00
[Sat Jun  8 10:47:16 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1043.00
[Sat Jun  8 10:47:16 2013] Got source and background scale factors 1141874.000000, 8966172.000000
[Sat Jun  8 10:47:16 2013] User source parameters:
  Position = (353.8, 340.1) = 11 18 0.10 7 50 42.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.2 +/- 14.5
  Background aperture counts = 132.8
  Rate = 0.0008 +/- 0.0002

[Sat Jun  8 10:47:16 2013] Updating counts from extracted products
[Sat Jun  8 10:47:16 2013] Set source signif. to 49.17/11.53 = 4.27
[Sat Jun  8 10:47:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:20 2013] Using photon index=1.80, rate=0.000788, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17.arf
[Sat Jun  8 10:47:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:20 2013] Updating source flux to 1.3e-14
[Sat Jun  8 10:47:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete