[Sat Jun 8 09:54:31 2013] Detection parameters: Position = (385.9, 429.8) = 11 17 50.71 7 57 13.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1302.9 +/- 43.8 Background counts = 18.2 Rate = 0.02 +/- 0.0007 [Sat Jun 8 09:54:32 2013] Off-axis axis estimate = 11.44' [Sat Jun 8 09:55:06 2013] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 12.15" [Sat Jun 8 09:55:06 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830 [Sat Jun 8 09:55:06 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.15" [Sat Jun 8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2.ximg exists [Sat Jun 8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2.csv [Sat Jun 8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2_1.ximg exists [Sat Jun 8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2.csv [Sat Jun 8 09:55:07 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat Jun 8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat Jun 8 09:55:07 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Sat Jun 8 09:55:32 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.036663 pixels away [Sat Jun 8 09:55:32 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:55:32 2013] Assessing source extent using major [Sat Jun 8 09:55:32 2013] Source does appear to be extended [Sat Jun 8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:55:58 2013] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 12.15" [Sat Jun 8 09:55:58 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830 [Sat Jun 8 09:55:58 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.15" [Sat Jun 8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2.ximg exists [Sat Jun 8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2.csv [Sat Jun 8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2_1.ximg exists [Sat Jun 8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2.csv [Sat Jun 8 09:55:59 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat Jun 8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat Jun 8 09:55:59 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Sat Jun 8 09:56:21 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.036663 pixels away [Sat Jun 8 09:56:21 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:56:21 2013] Assessing source extent using major [Sat Jun 8 09:56:21 2013] Source does appear to be extended [Sat Jun 8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:57:10 2013] Counts = 1302.895386, rescaling region sizes by 2.000000 [Sat Jun 8 09:57:10 2013] XMMSAS src. selection expression = ellipse(33522.394012, 37345.548584, 1305.000000, 1305.000000, 0.000000, X, Y) [Sat Jun 8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src.reg [Sat Jun 8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (311, 355) - (461, 505) [Sat Jun 8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(33522.394012, 37345.548584, 4350.000000, 8700.000000, X, Y) && !ellipse(34496.203100, 33540.450050, 382.536391, 251.559658, 42.508292, X, Y) && !ellipse(30733.187500, 29539.449158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.433777, 30366.737701, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14.gif [Sat Jun 8 09:57:11 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create [Sat Jun 8 09:57:11 2013] Mean detx,y = (-8449.04, -13129.15) [Sat Jun 8 09:57:11 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create [Sat Jun 8 09:57:11 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create [Sat Jun 8 09:57:11 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Sat Jun 8 09:57:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.pi.gz [Sat Jun 8 09:57:11 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create [Sat Jun 8 09:57:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 09:57:16 2013] rmf not generated due to insufficient counts [Sat Jun 8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14.arf exists, delete to re-create [Sat Jun 8 10:47:11 2013] Updating aperture counts using extracted products [Sat Jun 8 10:47:11 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1748.00 [Sat Jun 8 10:47:11 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 8152.00 [Sat Jun 8 10:47:11 2013] Got source and background scale factors 5185396.000000, 76612329.000000 [Sat Jun 8 10:47:11 2013] User source parameters: Position = (385.9, 429.8) = 11 17 50.71 7 57 13.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1196.2 +/- 42.8 Background aperture counts = 551.8 Rate = 0.02 +/- 0.0007 [Sat Jun 8 10:47:11 2013] Updating counts from extracted products [Sat Jun 8 10:47:11 2013] Set source signif. to 1196.24/23.49 = 50.93 [Sat Jun 8 10:47:19 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:47:19 2013] Using photon index=1.80, rate=0.0192, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14.arf [Sat Jun 8 10:47:19 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:47:19 2013] Updating source flux to 5.4e-13 [Sat Jun 8 10:47:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete