[Sat Jun  8 09:54:31 2013] Detection parameters:
  Position = (260.6, 163.0) = 11 18 27.39 7 37 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.3 +/- 17.5
  Background counts = 22.3
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 09:54:32 2013] Off-axis axis estimate = 10.19'
[Sat Jun  8 09:55:06 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:06 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Sat Jun  8 09:55:06 2013] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.756
[Sat Jun  8 09:55:06 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.53"
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun  8 09:55:07 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun  8 09:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun  8 09:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:32 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.749186 pixels away
[Sat Jun  8 09:55:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:32 2013] Assessing source extent using major
[Sat Jun  8 09:55:32 2013] Source does appear to be extended
[Sat Jun  8 09:55:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:58 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:58 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Sat Jun  8 09:55:58 2013] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.756
[Sat Jun  8 09:55:58 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.53"
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jun  8 09:55:59 2013] Fit fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_src13 appears to have run properly
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat Jun  8 09:55:59 2013] fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun  8 09:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat Jun  8 09:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:21 2013] Spatial fit model total counts = 363.150000, observed total counts = 359.000000
[Sat Jun  8 09:56:21 2013] Offset between fit and detection position for source 13 = 0.737240 pixels
[Sat Jun  8 09:56:21 2013] 376.200000 total counts/ 275.535000 bgd. counts: snr = 6.064432
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.737240 pixels
  Position = (260.0, 163.4) = 11 18 27.57 7 37 53.8
  Extent = 5.6" x 3.1", rotation angle = 66
  Source counts = 100.7 +/- 19.4
  Background counts = 275.5
  Rate = 0.002 +/- 0.0003
[Sat Jun  8 09:56:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:21 2013] Assessing source extent using major
[Sat Jun  8 09:56:21 2013] Source does appear to be extended
[Sat Jun  8 09:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.79
[Sat Jun  8 09:56:21 2013] Source is asymmetric
[Sat Jun  8 09:57:10 2013] XMMSAS src. selection expression = ellipse(22568.725020, 14171.405400, 338.772010, 188.827805, 65.617320, X, Y)
[Sat Jun  8 09:57:10 2013] Not overwriting source region fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun  8 09:57:10 2013] Extracting stamp from image fullrun_mos1_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (240, 144) - (279, 183)
[Sat Jun  8 09:57:10 2013] XMMSAS bgd. selection expression = annulus(22568.725020, 14171.405400, 564.620016, 1129.240032, X, Y) && !ellipse(22097.404694, 15141.821335, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 09:57:10 2013] Writing fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13.gif
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0082340101/products/events/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Mean detx,y = (7778.43, 6700.06) 
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0082340101/products/images/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:11 2013] Setting source spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun  8 09:57:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun  8 09:57:11 2013] ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13.rmf exists, delete to re-create
[Sat Jun  8 09:57:16 2013] fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Sat Jun  8 10:47:13 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 153.00
[Sat Jun  8 10:47:13 2013] Total counts from fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 205.00
[Sat Jun  8 10:47:13 2013] Got source and background scale factors 176544.000000, 1790555.000000
[Sat Jun  8 10:47:13 2013] User source parameters:
  Position = (260.0, 163.4) = 11 18 27.57 7 37 53.8
  Extent = 5.6" x 3.1", rotation angle = 66
  Source aperture counts = 132.8 +/- 13.4
  Background aperture counts = 20.2
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 10:47:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:20 2013] Using photon index=1.80, rate=0.00161, arf fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13.arf
[Sat Jun  8 10:47:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:20 2013] Updating source flux to 3.5e-14
[Sat Jun  8 10:47:39 2013] xmm0082340101/analysis//spectral/fullrun_mos1_xmm0082340101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete