[Fri Sep 23 02:07:21 2011] Detection parameters:
  Position = (209.4, 173.8) = 11 19 22.76 12 54 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 7.5
  Background counts = 6.6
  Rate = 0.0008 +/- 0.0002

[Fri Sep 23 02:07:21 2011] Off-axis axis estimate = 11.11'
[Fri Sep 23 04:01:21 2011] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 04:01:21 2011] Initial guess for spatial extent in simple fitting = 11.98"
[Fri Sep 23 04:01:21 2011] source mask rpix=2.8, npix_max = 42, mask sum = 43, frac = 1.015
[Fri Sep 23 04:01:21 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 11.98"
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48.ximg exists
[Fri Sep 23 05:01:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48.csv
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Sep 23 05:01:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48.csv
[Fri Sep 23 05:01:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Sep 23 05:01:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri Sep 23 05:01:43 2011] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 14.937764 pixels away
[Fri Sep 23 05:01:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:01:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:01:43 2011] Assessing source extent using major
[Fri Sep 23 05:01:43 2011] Source does appear to be extended
[Fri Sep 23 05:01:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:41:47 2011] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:41:47 2011] Initial guess for spatial extent in simple fitting = 11.98"
[Fri Sep 23 06:41:47 2011] source mask rpix=2.8, npix_max = 42, mask sum = 43, frac = 1.015
[Fri Sep 23 06:41:47 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 11.98"
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43.ximg exists
[Fri Sep 23 07:28:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43.csv
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Sep 23 07:28:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43.csv
[Fri Sep 23 07:28:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Sep 23 07:28:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Sep 23 07:28:39 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 81.043874 pixels away
[Fri Sep 23 07:28:39 2011] Spatial fit model total counts = 70.391600, observed total counts = 72.000000
[Fri Sep 23 07:28:39 2011] Offset between fit and detection position for source 45 = 0.263546 pixels
[Fri Sep 23 07:28:39 2011] 74.504700 total counts/ 47.130700 bgd. counts: snr = 3.987368
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.263546 pixels
  Position = (209.5, 174.0) = 11 19 22.73 12 54 48.5
  Extent = 7.4 (5.4-10.1)", rotation angle = 0
  Source counts = 27.4 +/- 8.6
  Background counts = 47.1
  Rate = 0.0008 +/- 0.0003
[Fri Sep 23 07:28:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:28:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:28:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:28:39 2011] Source does appear to be extended
[Fri Sep 23 07:28:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:08:30 2011] XMMSAS src. selection expression = ellipse(18178.092548, 15088.987600, 441.206511, 441.206511, 0.000000, X, Y)
[Fri Sep 23 10:08:30 2011] Writing source region out to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45_src.reg
[Fri Sep 23 10:08:30 2011] Extracting stamp from image fullrun_mos2_xmm0082140301_pi300-10000_cl_sm2.00.img.gz, (184, 149) - (235, 199)
[Fri Sep 23 10:08:30 2011] XMMSAS bgd. selection expression = annulus(18178.092548, 15088.987600, 735.344185, 1470.688369, X, Y)
[Fri Sep 23 10:08:30 2011] Writing fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45.gif
[Fri Sep 23 10:19:24 2011] Mean detx,y = (12760.10, -8204.60) 
[Fri Sep 23 10:19:25 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 10:19:36 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 10:19:36 2011] Setting source spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Sep 23 10:19:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Fri Sep 23 10:43:36 2011] Not generating rmf since there are only 27 counts
[Fri Sep 23 10:43:36 2011] rmf not generated due to insufficient counts
[Fri Sep 23 10:44:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:44:15 2011] Error reading totcts from fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Sep 23 10:44:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:44:16 2011] Using photon index=1.80, rate=0.000832, arf fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src45.arf
[Fri Sep 23 10:44:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:44:16 2011] Updating source flux to 3e-14
[Fri Sep 23 10:44:47 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting