[Fri Sep 23 02:07:20 2011] Detection parameters:
  Position = (378.1, 349.2) = 11 18 32.54 13 7 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.9 +/- 24.6
  Background counts = 8.8
  Rate = 0.02 +/- 0.001

[Fri Sep 23 02:07:21 2011] Off-axis axis estimate = 6.85'
[Fri Sep 23 04:01:21 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 04:01:21 2011] Initial guess for spatial extent in simple fitting = 9.85"
[Fri Sep 23 04:01:21 2011] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.014
[Fri Sep 23 04:01:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.85"
[Fri Sep 23 05:01:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 05:01:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 05:01:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 05:01:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 05:01:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:01:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:01:43 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.344731 pixels away
[Fri Sep 23 05:01:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:01:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:01:43 2011] Assessing source extent using major
[Fri Sep 23 05:01:43 2011] Source does appear to be extended
[Fri Sep 23 05:01:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:41:47 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:41:47 2011] Initial guess for spatial extent in simple fitting = 9.85"
[Fri Sep 23 06:41:47 2011] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.014
[Fri Sep 23 06:41:47 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.85"
[Fri Sep 23 07:28:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 07:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 07:28:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 07:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 07:28:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 07:28:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 07:28:39 2011] Spatial fit model total counts = 495.000000, observed total counts = 495.000000
[Fri Sep 23 07:28:39 2011] Offset between fit and detection position for source 4 = 0.175329 pixels
[Fri Sep 23 07:28:39 2011] 496.909000 total counts/ 185.777000 bgd. counts: snr = 22.826993
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.175329 pixels
  Position = (378.0, 349.3) = 11 18 32.59 13 7 31.0
  Extent = 5.9 (5.3-6.4)", rotation angle = 0
  Source counts = 311.1 +/- 22.3
  Background counts = 185.8
  Rate = 0.009 +/- 0.0007
[Fri Sep 23 07:28:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:28:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:28:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:28:39 2011] Source does appear to be extended
[Fri Sep 23 07:28:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:08:30 2011] XMMSAS src. selection expression = ellipse(32834.567480, 30339.343200, 352.973410, 352.973410, 0.000000, X, Y)
[Fri Sep 23 10:08:30 2011] Writing source region out to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep 23 10:08:30 2011] Extracting stamp from image fullrun_mos2_xmm0082140301_pi300-10000_cl_sm2.00.img.gz, (358, 329) - (398, 370)
[Fri Sep 23 10:08:30 2011] XMMSAS bgd. selection expression = annulus(32834.567480, 30339.343200, 588.289017, 1176.578034, X, Y)
[Fri Sep 23 10:08:30 2011] Writing fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4.gif
[Fri Sep 23 10:08:33 2011] Mean detx,y = (-6951.52, -530.54) 
[Fri Sep 23 10:08:34 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 10:08:46 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 10:08:46 2011] Setting source spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 23 10:08:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep 23 10:44:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:44:15 2011] Error reading totcts from fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 23 10:44:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:44:15 2011] Using photon index=1.80, rate=0.00946, arf fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4.arf
[Fri Sep 23 10:44:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:44:15 2011] Updating source flux to 1.5e-13
[Fri Sep 23 10:45:20 2011] Reading fit data from xmm0082140301/analysis//spectral/fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_pl.csv
[Fri Sep 23 10:45:20 2011] Spectral fit parameter nH value = 2.48584e+20
[Fri Sep 23 10:45:20 2011] Spectral fit parameter PhoIndex value = 1.77026
[Fri Sep 23 10:45:20 2011] Failed to get F(0.3-8.0) from xmm0082140301/analysis//spectral/fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 10:45:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:45:20 2011] Using Nh = 2.5e+20, photon index=1.77, rate=0.00946, arf fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src4.arf
[Fri Sep 23 10:45:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:45:20 2011] Updating source flux to 1.5e-13