[Fri Sep 23 02:07:20 2011] Detection parameters:
  Position = (280.2, 360.8) = 11 19 1.69 13 8 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 8.9
  Background counts = 10.2
  Rate = 0.001 +/- 0.0003

[Fri Sep 23 02:07:21 2011] Off-axis axis estimate = 4.71'
[Fri Sep 23 04:01:21 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 04:01:21 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Fri Sep 23 04:01:21 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Fri Sep 23 04:01:21 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 8.78"
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37.ximg exists
[Fri Sep 23 05:01:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37.csv
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Sep 23 05:01:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37.csv
[Fri Sep 23 05:01:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Sep 23 05:01:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Sep 23 05:01:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Sep 23 05:01:43 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 11.452013 pixels away
[Fri Sep 23 05:01:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:01:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:01:43 2011] Assessing source extent using major
[Fri Sep 23 05:01:43 2011] Source does appear to be extended
[Fri Sep 23 05:01:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:41:47 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:41:47 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Fri Sep 23 06:41:47 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Fri Sep 23 06:41:47 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 8.78"
[Fri Sep 23 07:28:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src34.ximg exists
[Fri Sep 23 07:28:19 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Sep 23 07:28:19 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_src34 appears to have run properly
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Sep 23 07:28:20 2011] fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Sep 23 07:28:20 2011] Fit fullrun_mos2_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Sep 23 07:28:39 2011] Source 33 is offset by 8.304559 and -3.862685 pixels which is larger than
2 X fitted extent = 1.009646 x 1.009646, not incorporating fit results
[Fri Sep 23 07:28:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:28:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:28:39 2011] Assessing source extent using major
[Fri Sep 23 07:28:39 2011] Source does appear to be extended
[Fri Sep 23 07:28:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:08:30 2011] XMMSAS src. selection expression = ellipse(24331.282623, 31341.834381, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 23 10:08:30 2011] Writing source region out to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33_src.reg
[Fri Sep 23 10:08:30 2011] Extracting stamp from image fullrun_mos2_xmm0082140301_pi300-10000_cl_sm2.00.img.gz, (243, 323) - (318, 398)
[Fri Sep 23 10:08:30 2011] XMMSAS bgd. selection expression = annulus(24331.282623, 31341.834381, 1087.500000, 2175.000000, X, Y) && !ellipse(24281.379600, 32971.422400, 374.272011, 374.272011, 0.000000, X, Y) && !ellipse(22049.015764, 33233.961000, 448.993613, 448.993613, 0.000000, X, Y) && !ellipse(26138.205292, 28724.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.842940, 30116.448000, 588.633617, 588.633617, 0.000000, X, Y)
[Fri Sep 23 10:08:30 2011] Writing fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33.gif
[Fri Sep 23 10:16:57 2011] Mean detx,y = (332.65, 3949.22) 
[Fri Sep 23 10:16:58 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 10:17:05 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 10:17:05 2011] Setting source spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Sep 23 10:17:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Sep 23 10:43:15 2011] Not generating rmf since there are only 38 counts
[Fri Sep 23 10:43:15 2011] rmf not generated due to insufficient counts
[Fri Sep 23 10:44:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:44:15 2011] Error reading totcts from fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Sep 23 10:44:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:44:16 2011] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0082140301_pi300-10000_pass1_cl_src33.arf
[Fri Sep 23 10:44:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:44:16 2011] Updating source flux to 1.8e-14
[Fri Sep 23 10:44:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting