[Fri Sep 23 02:06:55 2011] Detection parameters:
  Position = (390.7, 280.7) = 11 18 28.79 13 2 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.1 +/- 8.8
  Background counts = 7.8
  Rate = 0.002 +/- 0.0004

[Fri Sep 23 02:06:56 2011] Off-axis axis estimate = 6.81'
[Fri Sep 23 03:10:30 2011] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:10:30 2011] Initial guess for spatial extent in simple fitting = 9.84"
[Fri Sep 23 03:10:30 2011] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.918
[Fri Sep 23 03:10:30 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 9.84"
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18.ximg exists
[Fri Sep 23 04:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18.csv
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Sep 23 04:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18.csv
[Fri Sep 23 04:01:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Sep 23 04:01:21 2011] Fit fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Sep 23 05:01:37 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.472728 pixels away
[Fri Sep 23 05:01:37 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:01:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:01:37 2011] Assessing source extent using major
[Fri Sep 23 05:01:37 2011] Source does appear to be extended
[Fri Sep 23 05:01:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:55:52 2011] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:55:52 2011] Initial guess for spatial extent in simple fitting = 9.84"
[Fri Sep 23 05:55:52 2011] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.918
[Fri Sep 23 05:55:52 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 9.84"
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18.ximg exists
[Fri Sep 23 06:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18.csv
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Sep 23 06:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18.csv
[Fri Sep 23 06:41:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Sep 23 06:41:47 2011] Fit fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Sep 23 07:28:34 2011] Spatial fit model total counts = 103.993000, observed total counts = 104.000000
[Fri Sep 23 07:28:34 2011] Offset between fit and detection position for source 40 = 0.150993 pixels
[Fri Sep 23 07:28:34 2011] 105.755500 total counts/ 77.093100 bgd. counts: snr = 3.264411
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.150993 pixels
  Position = (390.6, 280.8) = 11 18 28.83 13 2 33.2
  Extent = 3.7 (2.8-5.0)", rotation angle = 0
  Source counts = 28.7 +/- 10.3
  Background counts = 77.1
  Rate = 0.0009 +/- 0.0003
[Fri Sep 23 07:28:35 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:28:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:28:35 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:28:35 2011] Source does appear to be extended
[Fri Sep 23 07:28:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 09:42:10 2011] XMMSAS src. selection expression = ellipse(33934.967800, 24382.508840, 222.048006, 222.048006, 0.000000, X, Y)
[Fri Sep 23 09:42:10 2011] Writing source region out to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40_src.reg
[Fri Sep 23 09:42:10 2011] Extracting stamp from image fullrun_mos1_xmm0082140301_pi300-10000_cl_sm2.00.img.gz, (378, 268) - (403, 294)
[Fri Sep 23 09:42:10 2011] XMMSAS bgd. selection expression = annulus(33934.967800, 24382.508840, 370.080011, 740.160021, X, Y)
[Fri Sep 23 09:42:10 2011] Writing fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40.gif
[Fri Sep 23 09:45:27 2011] Mean detx,y = (-6206.97, 5230.57) 
[Fri Sep 23 09:45:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 09:45:35 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 09:45:35 2011] Setting source spectrum file to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Sep 23 09:45:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Sep 23 10:07:28 2011] Not generating rmf since there are only 28 counts
[Fri Sep 23 10:07:28 2011] rmf not generated due to insufficient counts
[Fri Sep 23 10:44:14 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:44:14 2011] Error reading totcts from fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Sep 23 10:44:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:44:14 2011] Using photon index=1.80, rate=0.000871, arf fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src40.arf
[Fri Sep 23 10:44:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:44:14 2011] Updating source flux to 1.8e-14
[Fri Sep 23 10:44:17 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting