[Fri Sep 23 02:06:55 2011] Detection parameters:
  Position = (283.1, 197.9) = 11 19 0.84 12 56 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 9.0
  Background counts = 8.3
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 02:06:56 2011] Off-axis axis estimate = 7.37'
[Fri Sep 23 03:10:30 2011] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:10:30 2011] Initial guess for spatial extent in simple fitting = 10.11"
[Fri Sep 23 03:10:30 2011] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.002
[Fri Sep 23 03:10:30 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 10.11"
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27.ximg exists
[Fri Sep 23 04:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27.csv
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Sep 23 04:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27.csv
[Fri Sep 23 04:01:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 23 04:01:21 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 23 04:01:21 2011] Fit fullrun_mos1_xmm0082140301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep 23 05:01:37 2011] Source 23 is offset by -1.287909 and 9.023940 pixels which is larger than
2 X fitted extent = 1.162547 x 1.162547, not incorporating fit results
[Fri Sep 23 05:01:37 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:01:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:01:37 2011] Assessing source extent using major
[Fri Sep 23 05:01:37 2011] Source does appear to be extended
[Fri Sep 23 05:01:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:55:52 2011] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:55:52 2011] Initial guess for spatial extent in simple fitting = 10.11"
[Fri Sep 23 05:55:52 2011] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.002
[Fri Sep 23 05:55:52 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 10.11"
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27.ximg exists
[Fri Sep 23 06:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27.csv
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Sep 23 06:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27.csv
[Fri Sep 23 06:41:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Sep 23 06:41:47 2011] fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Sep 23 06:41:47 2011] Fit fullrun_mos1_xmm0082140301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Sep 23 07:28:34 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.163751 pixels away
[Fri Sep 23 07:28:34 2011] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 53.522316 pixels away
[Fri Sep 23 07:28:34 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 84.781002 pixels away
[Fri Sep 23 07:28:35 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:28:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:28:35 2011] Assessing source extent using major
[Fri Sep 23 07:28:35 2011] Source does appear to be extended
[Fri Sep 23 07:28:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 09:42:10 2011] XMMSAS src. selection expression = ellipse(24579.764160, 17171.540787, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 23 09:42:10 2011] Writing source region out to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23_src.reg
[Fri Sep 23 09:42:10 2011] Extracting stamp from image fullrun_mos1_xmm0082140301_pi300-10000_cl_sm2.00.img.gz, (246, 160) - (321, 235)
[Fri Sep 23 09:42:10 2011] XMMSAS bgd. selection expression = annulus(24579.764160, 17171.540787, 1087.500000, 2175.000000, X, Y) && !ellipse(23031.354400, 18145.186400, 455.668813, 455.668813, 0.000000, X, Y) && !ellipse(25212.481537, 15674.551636, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 09:42:10 2011] Writing fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23.gif
[Fri Sep 23 09:46:57 2011] Mean detx,y = (-8691.45, -6258.65) 
[Fri Sep 23 09:46:58 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 09:47:07 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 09:47:07 2011] Setting source spectrum file to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Sep 23 09:47:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Sep 23 10:07:50 2011] Not generating rmf since there are only 52 counts
[Fri Sep 23 10:07:50 2011] rmf not generated due to insufficient counts
[Fri Sep 23 10:44:14 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:44:14 2011] Error reading totcts from fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Sep 23 10:44:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:44:14 2011] Using photon index=1.80, rate=0.00159, arf fullrun_mos1_xmm0082140301_pi300-10000_pass1_cl_src23.arf
[Fri Sep 23 10:44:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 10:44:14 2011] Updating source flux to 3.2e-14
[Fri Sep 23 10:44:17 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting