[Tue Jun 18 23:52:14 2013] Detection parameters:
  Position = (459.4, 350.8) = 14 36 51.94 -14 58 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.0 +/- 19.2
  Background counts = 37.9
  Rate = 0.01 +/- 0.001

[Tue Jun 18 23:52:15 2013] Off-axis axis estimate = 12.27'
[Tue Jun 18 23:54:26 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 23:54:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 23:54:26 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Tue Jun 18 23:54:26 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.871
[Tue Jun 18 23:54:26 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.56"
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 19 00:22:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 19 00:22:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:19:05 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.431193 pixels away
[Wed Jun 19 01:19:05 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 01:19:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 01:19:05 2013] Assessing source extent using major
[Wed Jun 19 01:19:05 2013] Source does appear to be extended
[Wed Jun 19 01:19:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 01:19:21 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 01:19:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 01:19:21 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Wed Jun 19 01:19:21 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.871
[Wed Jun 19 01:19:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.56"
[Wed Jun 19 01:57:32 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 19 01:57:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 19 01:57:32 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 19 01:57:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 19 01:57:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:57:33 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 19 01:57:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 19 01:57:33 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 19 01:57:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 19 01:57:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 02:53:46 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.588303 pixels away
[Wed Jun 19 02:53:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 02:53:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 02:53:46 2013] Assessing source extent using major
[Wed Jun 19 02:53:46 2013] Source does appear to be extended
[Wed Jun 19 02:53:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 02:54:01 2013] XMMSAS src. selection expression = ellipse(39915.744385, 30471.914032, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 02:54:01 2013] Writing source region out to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 19 02:54:01 2013] Extracting stamp from image fullrun_pn_xmm0081341401_pi300-10000_cl_sm2.00.img.gz, (422, 313) - (497, 388)
[Wed Jun 19 02:54:01 2013] XMMSAS bgd. selection expression = annulus(39915.744385, 30471.914032, 1087.500000, 2175.000000, X, Y)
[Wed Jun 19 02:54:01 2013] Writing fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3.gif
[Wed Jun 19 02:55:44 2013] Mean detx,y = (13551.79, 1504.95) 
[Wed Jun 19 02:55:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 02:56:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 02:56:12 2013] Setting source spectrum file to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 19 02:56:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 19 03:12:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 03:12:59 2013] rmf not generated due to insufficient counts
[Wed Jun 19 03:59:56 2013] Updating aperture counts using extracted products
[Wed Jun 19 03:59:56 2013] Total counts from fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 309.00
[Wed Jun 19 03:59:56 2013] Total counts from fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1013.00
[Wed Jun 19 03:59:56 2013] Got source and background scale factors 912026.000000, 5961248.000000
[Wed Jun 19 03:59:56 2013] User source parameters:
  Position = (459.4, 350.8) = 14 36 51.94 -14 58 11.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 154.0 +/- 18.6
  Background aperture counts = 155.0
  Rate = 0.008 +/- 0.001

[Wed Jun 19 03:59:56 2013] Updating counts from extracted products
[Wed Jun 19 03:59:56 2013] Set source signif. to 154.02/12.45 = 12.37
[Wed Jun 19 04:00:05 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 04:00:05 2013] Using photon index=1.80, rate=0.0085, arf fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3.arf
[Wed Jun 19 04:00:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 04:00:05 2013] Updating source flux to 6.7e-14
[Wed Jun 19 04:00:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 04:00:23 2013] xmm0081341401/analysis//spectral/fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete