[Tue Jun 18 23:52:14 2013] Detection parameters:
  Position = (266.5, 286.8) = 14 37 49.84 -15 2 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.1 +/- 16.4
  Background counts = 52.1
  Rate = 0.01 +/- 0.001

[Tue Jun 18 23:52:15 2013] Off-axis axis estimate = 2.47'
[Tue Jun 18 23:54:26 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 23:54:26 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Tue Jun 18 23:54:26 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.880
[Tue Jun 18 23:54:26 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.66"
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13.csv
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13.csv
[Wed Jun 19 00:22:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 19 00:22:40 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 19 00:22:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 19 00:22:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:19:05 2013] Source 13 is offset by -0.825700 and -5.414409 pixels which is larger than
2 X fitted extent = 0.926671 x 0.926671, not incorporating fit results
[Wed Jun 19 01:19:05 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 01:19:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 01:19:05 2013] Assessing source extent using major
[Wed Jun 19 01:19:05 2013] Source does appear to be extended
[Wed Jun 19 01:19:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 01:19:21 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 01:19:21 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Wed Jun 19 01:19:21 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.880
[Wed Jun 19 01:19:21 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.66"
[Wed Jun 19 01:57:32 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 19 01:57:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 01:57:32 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 19 01:57:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 01:57:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:57:33 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 19 01:57:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 19 01:57:33 2013] fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 19 01:57:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 19 01:57:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 02:53:46 2013] Source 13 is offset by -6.562027 and 5.797867 pixels which is larger than
2 X fitted extent = 0.880676 x 0.880676, not incorporating fit results
[Wed Jun 19 02:53:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 02:53:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 02:53:46 2013] Assessing source extent using major
[Wed Jun 19 02:53:46 2013] Source does appear to be extended
[Wed Jun 19 02:53:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 02:54:01 2013] XMMSAS src. selection expression = ellipse(23135.555664, 24898.962402, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 02:54:01 2013] Writing source region out to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_src.reg
[Wed Jun 19 02:54:01 2013] Extracting stamp from image fullrun_pn_xmm0081341401_pi300-10000_cl_sm2.00.img.gz, (229, 249) - (304, 324)
[Wed Jun 19 02:54:01 2013] XMMSAS bgd. selection expression = annulus(23135.555664, 24898.962402, 1087.500000, 2175.000000, X, Y) && !ellipse(20761.817460, 24425.417400, 403.464812, 403.464812, 0.000000, X, Y) && !ellipse(26581.703600, 27749.185800, 1333.544038, 465.508813, 27.396300, X, Y) && !ellipse(25476.176392, 22637.474823, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 02:54:01 2013] Writing fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13.gif
[Wed Jun 19 03:01:59 2013] Mean detx,y = (-4055.83, 1553.34) 
[Wed Jun 19 03:02:01 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 03:02:24 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 03:02:24 2013] Setting source spectrum file to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 19 03:02:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jun 19 03:23:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 03:23:54 2013] rmf not generated due to insufficient counts
[Wed Jun 19 04:00:00 2013] Updating aperture counts using extracted products
[Wed Jun 19 04:00:00 2013] Total counts from fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 337.00
[Wed Jun 19 04:00:00 2013] Total counts from fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 2116.00
[Wed Jun 19 04:00:00 2013] Got source and background scale factors 1040852.000000, 9902586.000000
[Wed Jun 19 04:00:00 2013] User source parameters:
  Position = (266.5, 286.8) = 14 37 49.84 -15 2 47.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 114.6 +/- 19.4
  Background aperture counts = 222.4
  Rate = 0.006 +/- 0.001

[Wed Jun 19 04:00:00 2013] Updating counts from extracted products
[Wed Jun 19 04:00:00 2013] Set source signif. to 114.59/14.91 = 7.68
[Wed Jun 19 04:00:06 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 04:00:06 2013] Using photon index=1.80, rate=0.00632, arf fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13.arf
[Wed Jun 19 04:00:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 04:00:06 2013] Updating source flux to 3e-14
[Wed Jun 19 04:00:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 04:00:23 2013] xmm0081341401/analysis//spectral/fullrun_pn_xmm0081341401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete