[Tue Jun 18 23:52:53 2013] Detection parameters:
  Position = (346.0, 317.2) = 14 37 25.97 -15 0 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.8 +/- 19.4
  Background counts = 14.7
  Rate = 0.01 +/- 0.001

[Tue Jun 18 23:52:54 2013] Off-axis axis estimate = 3.71'
[Wed Jun 19 00:46:19 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 00:46:19 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Jun 19 00:46:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.692
[Wed Jun 19 00:46:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.28"
[Wed Jun 19 01:18:58 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 19 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 01:18:58 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 19 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 01:18:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:18:58 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 19 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 01:18:58 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 19 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 01:18:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 01:19:13 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.206075 pixels away
[Wed Jun 19 01:19:13 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 01:19:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 01:19:13 2013] Assessing source extent using major
[Wed Jun 19 01:19:13 2013] Source does appear to be extended
[Wed Jun 19 01:19:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 02:23:43 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 02:23:43 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Jun 19 02:23:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.692
[Wed Jun 19 02:23:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.28"
[Wed Jun 19 02:53:39 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 19 02:53:39 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 19 02:53:39 2013] Fit fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 19 02:53:40 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 19 02:53:40 2013] fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 19 02:53:40 2013] Fit fullrun_mos2_xmm0081341401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 19 02:53:52 2013] Spatial fit model total counts = 250.877000, observed total counts = 273.000000
[Wed Jun 19 02:53:52 2013] Offset between fit and detection position for source 3 = 1.427325 pixels
[Wed Jun 19 02:53:52 2013] 252.653600 total counts/ 171.945000 bgd. counts: snr = 6.154957
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.427325 pixels
  Position = (346.3, 318.6) = 14 37 25.88 -15 0 32.2
  Extent = 6.8 (4.9-9.8)", rotation angle = 0
  Source counts = 80.7 +/- 15.9
  Background counts = 171.9
  Rate = 0.004 +/- 0.0007
[Wed Jun 19 02:53:52 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 02:53:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 02:53:52 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 02:53:52 2013] Source does appear to be extended
[Wed Jun 19 02:53:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 03:45:12 2013] XMMSAS src. selection expression = ellipse(30080.868000, 27665.754200, 406.576212, 406.576212, 0.000000, X, Y)
[Wed Jun 19 03:45:12 2013] Writing source region out to fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 19 03:45:12 2013] Extracting stamp from image fullrun_mos2_xmm0081341401_pi300-10000_cl_sm2.00.img.gz, (323, 295) - (370, 342)
[Wed Jun 19 03:45:12 2013] XMMSAS bgd. selection expression = annulus(30080.868000, 27665.754200, 677.627019, 1355.254039, X, Y)
[Wed Jun 19 03:45:12 2013] Writing fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3.gif
[Wed Jun 19 03:45:14 2013] Mean detx,y = (-3286.98, -1212.71) 
[Wed Jun 19 03:45:15 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 03:45:23 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 03:45:23 2013] Setting source spectrum file to fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 19 03:45:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 19 03:50:22 2013] Not generating rmf since there are only 80 counts
[Wed Jun 19 03:50:22 2013] rmf not generated due to insufficient counts
[Wed Jun 19 04:00:10 2013] Updating aperture counts using extracted products
[Wed Jun 19 04:00:10 2013] Total counts from fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 148.00
[Wed Jun 19 04:00:10 2013] Total counts from fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 335.00
[Wed Jun 19 04:00:10 2013] Got source and background scale factors 471708.000000, 4211908.000000
[Wed Jun 19 04:00:10 2013] User source parameters:
  Position = (346.3, 318.6) = 14 37 25.88 -15 0 32.2
  Extent = 6.8 (4.9-9.8)", rotation angle = 0
  Source aperture counts = 110.5 +/- 13.2
  Background aperture counts = 37.5
  Rate = 0.005 +/- 0.0006

[Wed Jun 19 04:00:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 04:00:14 2013] Using photon index=1.80, rate=0.00374, arf fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3.arf
[Wed Jun 19 04:00:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 04:00:14 2013] Updating source flux to 4.8e-14
[Wed Jun 19 04:00:18 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 04:00:20 2013] xmm0081341401/analysis//spectral/fullrun_mos2_xmm0081341401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete