[Sat Jun  1 21:25:53 2013] Detection parameters:
  Position = (376.5, 331.5) = 19 29 48.62 -72 35 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 12.1
  Background counts = 35.6
  Rate = 0.005 +/- 0.0009

[Sat Jun  1 21:25:54 2013] Off-axis axis estimate = 6.14'
[Sat Jun  1 21:59:05 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 21:59:05 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Sat Jun  1 21:59:05 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.868
[Sat Jun  1 21:59:05 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.50"
[Sat Jun  1 22:14:45 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun  1 22:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7.csv
[Sat Jun  1 22:14:45 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun  1 22:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7.csv
[Sat Jun  1 22:14:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 22:14:45 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun  1 22:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun  1 22:14:45 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun  1 22:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun  1 22:14:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341001_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 22:14:54 2013] Warning, spatial fit 7 centroid is now closest to src. 5
[Sat Jun  1 22:14:54 2013] Spatial fit model total counts = 301.323000, observed total counts = 242.000000
[Sat Jun  1 22:14:54 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 22:14:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 22:14:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 22:14:54 2013] Assessing source extent using major
[Sat Jun  1 22:14:54 2013] Source does appear to be extended
[Sat Jun  1 22:14:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 22:46:00 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 22:46:00 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Sat Jun  1 22:46:00 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.868
[Sat Jun  1 22:46:00 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.50"
[Sat Jun  1 23:00:42 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun  1 23:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7.csv
[Sat Jun  1 23:00:42 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun  1 23:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7.csv
[Sat Jun  1 23:00:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 23:00:42 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun  1 23:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun  1 23:00:42 2013] fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun  1 23:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun  1 23:00:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081341001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 23:00:54 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.686630 pixels away
[Sat Jun  1 23:00:54 2013] Spatial fit model total counts = 301.510000, observed total counts = 242.000000
[Sat Jun  1 23:00:54 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 23:00:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 23:00:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 23:00:54 2013] Assessing source extent using major
[Sat Jun  1 23:00:54 2013] Source does appear to be extended
[Sat Jun  1 23:00:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 23:28:00 2013] XMMSAS src. selection expression = ellipse(32702.892670, 28791.798218, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 23:28:00 2013] Writing source region out to fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  1 23:28:00 2013] Extracting stamp from image fullrun_mos2_xmm0081341001_pi300-10000_cl_sm2.00.img.gz, (339, 294) - (414, 369)
[Sat Jun  1 23:28:00 2013] XMMSAS bgd. selection expression = annulus(32702.892670, 28791.798218, 1087.500000, 2175.000000, X, Y) && !ellipse(33367.292511, 29224.087433, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 23:28:00 2013] Writing fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6.gif
[Sat Jun  1 23:29:25 2013] Mean detx,y = (7204.39, -5986.70) 
[Sat Jun  1 23:29:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 23:29:47 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 23:29:47 2013] Setting source spectrum file to fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  1 23:29:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  1 23:31:54 2013] Not generating rmf since there are only 64 counts
[Sat Jun  1 23:31:54 2013] rmf not generated due to insufficient counts
[Sat Jun  1 23:33:10 2013] Updating aperture counts using extracted products
[Sat Jun  1 23:33:10 2013] Total counts from fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 184.00
[Sat Jun  1 23:33:10 2013] Total counts from fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_bgd.pi.gz = 875.00
[Sat Jun  1 23:33:11 2013] Got source and background scale factors 1118628.000000, 9460371.000000
[Sat Jun  1 23:33:11 2013] User source parameters:
  Position = (376.5, 331.5) = 19 29 48.62 -72 35 44.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.5 +/- 14.6
  Background aperture counts = 103.5
  Rate = 0.004 +/- 0.0007

[Sat Jun  1 23:33:11 2013] Updating counts from extracted products
[Sat Jun  1 23:33:11 2013] Set source signif. to 80.54/10.17 = 7.92
[Sat Jun  1 23:33:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 23:33:11 2013] Using photon index=1.80, rate=0.00397, arf fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6.arf
[Sat Jun  1 23:33:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 23:33:11 2013] Updating source flux to 6.9e-14
[Sat Jun  1 23:33:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 23:33:15 2013] xmm0081341001/analysis//spectral/fullrun_mos2_xmm0081341001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete