[Wed May 8 16:36:37 2013] Detection parameters: Position = (258.7, 375.8) = 22 51 55.50 -17 45 49.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 127.8 +/- 14.1 Background counts = 16.7 Rate = 0.01 +/- 0.001 [Wed May 8 16:36:37 2013] Off-axis axis estimate = 6.31' [Wed May 8 16:38:39 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting [Wed May 8 16:38:39 2013] Initial guess for spatial extent in simple fitting = 9.58" [Wed May 8 16:38:39 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.787 [Wed May 8 16:38:39 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.58" [Wed May 8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19.ximg exists [Wed May 8 17:29:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19.csv [Wed May 8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19_1.ximg exists [Wed May 8 17:29:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19.csv [Wed May 8 17:29:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Wed May 8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Wed May 8 17:29:30 2013] Fit fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Wed May 8 18:26:19 2013] Spatial fit model total counts = 272.386000, observed total counts = 250.000000 [Wed May 8 18:26:19 2013] Offset between fit and detection position for source 20 = 0.242342 pixels [Wed May 8 18:26:19 2013] 275.095900 total counts/ 177.025000 bgd. counts: snr = 7.370940 Spatial fit parameters: Offset between fit and detection position for source 20 = 0.242342 pixels Position = (258.5, 376.0) = 22 51 55.56 -17 45 49.7 Extent = 5.3 (4.1-7.0)", rotation angle = 0 Source counts = 98.1 +/- 16.6 Background counts = 177.0 Rate = 0.005 +/- 0.0008 [Wed May 8 18:26:19 2013] Vigneting correction estimate = 1.000000 [Wed May 8 18:26:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 18:26:19 2013] Assessing source extent using major axis lower bound [Wed May 8 18:26:19 2013] Source does appear to be extended [Wed May 8 18:26:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 18:26:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 8 18:26:38 2013] Initial guess for spatial extent in simple fitting = 5.33" [Wed May 8 18:26:38 2013] source mask rpix=1.2, npix_max = 11, mask sum = 11, frac = 0.924 [Wed May 8 18:26:38 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 5.33" [Wed May 8 19:10:59 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19.ximg exists [Wed May 8 19:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19.csv [Wed May 8 19:10:59 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19_1.ximg exists [Wed May 8 19:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19.csv [Wed May 8 19:10:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 19:11:00 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Wed May 8 19:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19.csv [Wed May 8 19:11:00 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Wed May 8 19:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19.csv [Wed May 8 19:11:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 20:12:35 2013] Warning, spatial fit 19 centroid is now closest to src. 21 [Wed May 8 20:12:35 2013] Vigneting correction estimate = 1.000000 [Wed May 8 20:12:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 20:12:35 2013] Assessing source extent using major axis lower bound [Wed May 8 20:12:35 2013] Source does appear to be extended [Wed May 8 20:12:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 20:12:54 2013] XMMSAS src. selection expression = ellipse(22442.111000, 32661.248600, 319.729809, 319.729809, 0.000000, X, Y) [Wed May 8 20:12:54 2013] Writing source region out to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_src.reg [Wed May 8 20:12:54 2013] Extracting stamp from image fullrun_pn_xmm0081340901_pi300-10000_cl_sm2.00.img.gz, (240, 358) - (277, 394) [Wed May 8 20:12:54 2013] XMMSAS bgd. selection expression = annulus(22442.111000, 32661.248600, 532.883015, 1065.766031, X, Y) && !ellipse(21018.199600, 31816.254400, 984.008028, 489.260014, 94.867453, X, Y) [Wed May 8 20:12:54 2013] Writing fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20.gif [Wed May 8 20:24:36 2013] Mean detx,y = (4598.19, 6492.76) [Wed May 8 20:24:38 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 20:24:48 2013] Binned source spectrum to 10 counts/bin [Wed May 8 20:24:48 2013] Setting source spectrum file to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed May 8 20:24:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_bgd.pi.gz [Wed May 8 20:46:54 2013] Not generating rmf since there are only 98 counts [Wed May 8 20:46:54 2013] rmf not generated due to insufficient counts [Wed May 8 21:20:16 2013] Updating aperture counts using extracted products [Wed May 8 21:20:16 2013] Total counts from fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 118.00 [Wed May 8 21:20:16 2013] Total counts from fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_bgd.pi.gz = 196.00 [Wed May 8 21:20:16 2013] Got source and background scale factors 280698.000000, 2315916.000000 [Wed May 8 21:20:16 2013] User source parameters: Position = (258.5, 376.0) = 22 51 55.56 -17 45 49.7 Extent = 5.3 (4.1-7.0)", rotation angle = 0 Source aperture counts = 94.2 +/- 11.9 Background aperture counts = 23.8 Rate = 0.005 +/- 0.0006 [Wed May 8 21:20:21 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 21:20:21 2013] Using photon index=1.80, rate=0.00494, arf fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20.arf [Wed May 8 21:20:21 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 21:20:21 2013] Updating source flux to 2.5e-14 [Wed May 8 21:20:33 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 8 21:20:35 2013] xmm0081340901/analysis//spectral/fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete