[Wed May  8 16:36:36 2013] Detection parameters:
  Position = (381.9, 182.9) = 22 51 17.96 -17 59 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1702.2 +/- 49.5
  Background counts = 17.8
  Rate = 0.09 +/- 0.002

[Wed May  8 16:36:37 2013] Off-axis axis estimate = 10.33'
[Wed May  8 16:38:39 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Wed May  8 16:38:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 16:38:39 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Wed May  8 16:38:39 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Wed May  8 16:38:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.59"
[Wed May  8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  8 17:29:30 2013] Fit fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed May  8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  8 17:29:30 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  8 17:29:30 2013] Fit fullrun_pn_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  8 18:26:19 2013] Spatial fit model total counts = 1927.870000, observed total counts = 1846.000000
[Wed May  8 18:26:19 2013] Offset between fit and detection position for source 1 = 0.199827 pixels
[Wed May  8 18:26:19 2013] 1932.776000 total counts/ 609.686000 bgd. counts: snr = 53.584141
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.199827 pixels
  Position = (381.7, 182.8) = 22 51 18.00 -17 59 50.0
  Extent = 9.6 (9.1-10.1)" x 4.7 (4.4-5.0)", rotation angle = 312 (309-315) degrees
  Source counts = 1323.1 +/- 44.0
  Background counts = 609.7
  Rate = 0.07 +/- 0.002
[Wed May  8 18:26:19 2013] Vigneting correction estimate = 1.000000
[Wed May  8 18:26:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 18:26:19 2013] Assessing source extent using major axis lower bound
[Wed May  8 18:26:19 2013] Source does appear to be extended
[Wed May  8 18:26:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.81
[Wed May  8 18:26:19 2013] Source is asymmetric
[Wed May  8 18:26:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 18:26:37 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Wed May  8 18:26:37 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed May  8 18:26:37 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.16"
[Wed May  8 19:10:59 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  8 19:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1.csv
[Wed May  8 19:10:59 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  8 19:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1.csv
[Wed May  8 19:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 19:11:00 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  8 19:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 19:11:00 2013] fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  8 19:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 19:11:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 20:12:35 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed May  8 20:12:35 2013] Vigneting correction estimate = 1.000000
[Wed May  8 20:12:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 20:12:35 2013] Assessing source extent using major axis lower bound
[Wed May  8 20:12:35 2013] Source does appear to be extended
[Wed May  8 20:12:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.81
[Wed May  8 20:12:35 2013] Source is asymmetric
[Wed May  8 20:12:54 2013] Counts = 1323.090000, rescaling region sizes by 2.000000
[Wed May  8 20:12:54 2013] XMMSAS src. selection expression = ellipse(33162.533200, 15852.481400, 1151.481633, 567.891616, 312.240769, X, Y)
[Wed May  8 20:12:54 2013] Writing source region out to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_src.reg
[Wed May  8 20:12:54 2013] Extracting stamp from image fullrun_pn_xmm0081340901_pi300-10000_cl_sm2.00.img.gz, (316, 117) - (448, 249)
[Wed May  8 20:12:54 2013] XMMSAS bgd. selection expression = annulus(33162.533200, 15852.481400, 3838.272110, 7676.544221, X, Y) && !ellipse(33883.772705, 22926.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35387.716705, 15085.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36088.098400, 22369.594600, 810.392023, 218.896806, 124.961529, X, Y) && !ellipse(34796.835200, 22389.558880, 439.165613, 226.723207, 85.766080, X, Y) && !ellipse(37747.554535, 21971.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34714.705560, 10895.078400, 810.232023, 273.649608, 313.354403, X, Y) && !ellipse(26680.435580, 17328.615400, 476.629614, 476.629614, 0.000000, X, Y) && !ellipse(28438.140350, 16776.911835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26161.497864, 16696.198944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.566960, 14594.449400, 509.649615, 285.603208, 339.633698, X, Y) && !ellipse(25570.618439, 9067.204575, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 20:12:54 2013] Writing fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1.gif
[Wed May  8 20:13:07 2013] Mean detx,y = (-11459.76, -5282.40) 
[Wed May  8 20:13:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 20:15:06 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 20:15:06 2013] Setting source spectrum file to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  8 20:15:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  8 21:20:12 2013] Updating aperture counts using extracted products
[Wed May  8 21:20:12 2013] Total counts from fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1649.00
[Wed May  8 21:20:12 2013] Total counts from fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9000.00
[Wed May  8 21:20:12 2013] Got source and background scale factors 1835839.000000, 112443970.000000
[Wed May  8 21:20:12 2013] User source parameters:
  Position = (381.7, 182.8) = 22 51 18.00 -17 59 50.0
  Extent = 9.6 (9.1-10.1)" x 4.7 (4.4-5.0)", rotation angle = 312 (309-315) degrees
  Source aperture counts = 1502.1 +/- 41.6
  Background aperture counts = 146.9
  Rate = 0.08 +/- 0.002

[Wed May  8 21:20:21 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 21:20:21 2013] Using photon index=1.80, rate=0.0666, arf fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1.arf
[Wed May  8 21:20:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 21:20:21 2013] Updating source flux to 4.3e-13
[Wed May  8 21:20:35 2013] xmm0081340901/analysis//spectral/fullrun_pn_xmm0081340901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete