[Wed May  8 16:36:59 2013] Detection parameters:
  Position = (95.8, 233.7) = 22 52 45.16 -17 56 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.5 +/- 8.5
  Background counts = 4.7
  Rate = 0.002 +/- 0.0004

[Wed May  8 16:37:00 2013] Off-axis axis estimate = 15.42'
[Wed May  8 17:29:30 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Wed May  8 17:29:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 17:29:30 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Wed May  8 17:29:30 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.995
[Wed May  8 17:29:30 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 14.14"
[Wed May  8 17:57:51 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18.ximg exists
[Wed May  8 17:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18.csv
[Wed May  8 17:57:51 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May  8 17:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18.csv
[Wed May  8 17:57:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 17:57:51 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May  8 17:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May  8 17:57:51 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May  8 17:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May  8 17:57:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 18:26:23 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 18.463977 pixels away
[Wed May  8 18:26:23 2013] Vigneting correction estimate = 1.000000
[Wed May  8 18:26:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 18:26:23 2013] Assessing source extent using major
[Wed May  8 18:26:23 2013] Source does appear to be extended
[Wed May  8 18:26:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 19:11:00 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Wed May  8 19:11:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 19:11:00 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Wed May  8 19:11:00 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.995
[Wed May  8 19:11:00 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 14.14"
[Wed May  8 19:45:26 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_src18.ximg exists
[Wed May  8 19:45:26 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May  8 19:45:26 2013] Fit fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_src18 appears to have run properly
[Wed May  8 19:45:27 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May  8 19:45:27 2013] fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May  8 19:45:27 2013] Fit fullrun_mos1_xmm0081340901_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May  8 20:12:39 2013] Spatial fit model total counts = 101.126000, observed total counts = 92.000000
[Wed May  8 20:12:39 2013] Offset between fit and detection position for source 14 = 0.270620 pixels
[Wed May  8 20:12:39 2013] 102.047800 total counts/ 73.806400 bgd. counts: snr = 3.287299
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.270620 pixels
  Position = (96.1, 233.8) = 22 52 45.08 -17 56 7.7
  Extent = 7.0 (4.7-10.9)", rotation angle = 60 (38-86) degrees
  Source counts = 28.2 +/- 10.1
  Background counts = 73.8
  Rate = 0.001 +/- 0.0004
[Wed May  8 20:12:39 2013] Vigneting correction estimate = 1.000000
[Wed May  8 20:12:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 20:12:39 2013] Assessing source extent using major axis lower bound
[Wed May  8 20:12:39 2013] Source does appear to be extended
[Wed May  8 20:12:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Wed May  8 20:53:43 2013] XMMSAS src. selection expression = ellipse(8309.215520, 20288.823800, 422.160012, 212.097606, 60.299032, X, Y)
[Wed May  8 20:53:43 2013] Writing source region out to fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_src.reg
[Wed May  8 20:53:43 2013] Extracting stamp from image fullrun_mos1_xmm0081340901_pi300-10000_cl_sm2.00.img.gz, (72, 210) - (120, 258)
[Wed May  8 20:53:43 2013] XMMSAS bgd. selection expression = annulus(8309.215520, 20288.823800, 703.600020, 1407.200040, X, Y)
[Wed May  8 20:53:43 2013] Writing fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14.gif
[Wed May  8 20:58:05 2013] Mean detx,y = (10266.90, 12957.87) 
[Wed May  8 20:58:06 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 20:58:20 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 20:58:21 2013] Setting source spectrum file to fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed May  8 20:58:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed May  8 21:05:31 2013] Not generating rmf since there are only 28 counts
[Wed May  8 21:05:31 2013] rmf not generated due to insufficient counts
[Wed May  8 21:20:23 2013] Updating aperture counts using extracted products
[Wed May  8 21:20:23 2013] Total counts from fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 31.00
[Wed May  8 21:20:24 2013] Total counts from fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_bgd.pi.gz = 80.00
[Wed May  8 21:20:24 2013] Got source and background scale factors 283200.000000, 3138679.000000
[Wed May  8 21:20:24 2013] User source parameters:
  Position = (96.1, 233.8) = 22 52 45.08 -17 56 7.7
  Extent = 7.0 (4.7-10.9)", rotation angle = 60 (38-86) degrees
  Source aperture counts = 23.8 +/- 6.6
  Background aperture counts = 7.2
  Rate = 0.001 +/- 0.0003

[Wed May  8 21:20:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 21:20:25 2013] Using photon index=1.80, rate=0.00126, arf fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14.arf
[Wed May  8 21:20:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 21:20:25 2013] Updating source flux to 4.9e-14
[Wed May  8 21:20:31 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 21:20:32 2013] xmm0081340901/analysis//spectral/fullrun_mos1_xmm0081340901_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete