[Tue May 22 10:22:36 2012] Detection parameters:
  Position = (305.0, 332.2) = 12 13 42.93 2 52 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 542.7 +/- 29.1
  Background counts = 27.0
  Rate = 0.04 +/- 0.002

[Tue May 22 10:22:39 2012] Off-axis axis estimate = 2.49'
[Tue May 22 10:26:21 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:26:21 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Tue May 22 10:26:21 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Tue May 22 10:26:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.68"
[Tue May 22 12:32:39 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 22 12:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2.csv
[Tue May 22 12:32:39 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 22 12:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2.csv
[Tue May 22 12:32:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:32:40 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 22 12:32:40 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 22 12:32:40 2012] Fit fullrun_pn_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May 22 14:42:30 2012] Spatial fit model total counts = 761.332000, observed total counts = 722.000000
[Tue May 22 14:42:30 2012] Offset between fit and detection position for source 2 = 0.104939 pixels
[Tue May 22 14:42:30 2012] 765.203000 total counts/ 378.946000 bgd. counts: snr = 19.842103
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104939 pixels
  Position = (304.9, 332.2) = 12 13 42.96 2 52 49.4
  Extent = 5.6 (5.0-6.1)", rotation angle = 0
  Source counts = 386.3 +/- 27.7
  Background counts = 378.9
  Rate = 0.02 +/- 0.001
[Tue May 22 14:42:30 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:42:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:42:30 2012] Assessing source extent using major axis lower bound
[Tue May 22 14:42:30 2012] Source does appear to be extended
[Tue May 22 14:42:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 14:43:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 14:43:06 2012] Initial guess for spatial extent in simple fitting = 5.61"
[Tue May 22 14:43:06 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.249
[Tue May 22 14:43:06 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.61"
[Tue May 22 16:49:16 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 22 16:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2.csv
[Tue May 22 16:49:16 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 22 16:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2.csv
[Tue May 22 16:49:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:49:17 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 22 16:49:17 2012] fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 22 16:49:17 2012] Fit fullrun_pn_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue May 22 18:35:16 2012] Spatial fit model total counts = 761.482000, observed total counts = 722.000000
[Tue May 22 18:35:16 2012] Offset between fit and detection position for source 2 = 0.000544 pixels
[Tue May 22 18:35:16 2012] 765.323000 total counts/ 379.463000 bgd. counts: snr = 19.808201
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000544 pixels
  Position = (304.9, 332.2) = 12 13 42.96 2 52 49.4
  Extent = 5.6 (5.0-6.1)", rotation angle = 0
  Source counts = 385.9 +/- 27.7
  Background counts = 379.5
  Rate = 0.02 +/- 0.001
[Tue May 22 18:35:16 2012] Vigneting correction estimate = 1.000000
[Tue May 22 18:35:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 18:35:16 2012] Assessing source extent using major axis lower bound
[Tue May 22 18:35:16 2012] Source does appear to be extended
[Tue May 22 18:35:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 18:35:51 2012] XMMSAS src. selection expression = ellipse(26482.022520, 28857.059000, 335.835010, 335.835010, 0.000000, X, Y)
[Tue May 22 18:35:51 2012] Writing source region out to fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_src.reg
[Tue May 22 18:35:51 2012] Extracting stamp from image fullrun_pn_xmm0081340801_pi300-10000_cl_sm2.00.img.gz, (286, 313) - (324, 352)
[Tue May 22 18:35:51 2012] XMMSAS bgd. selection expression = annulus(26482.022520, 28857.059000, 559.725016, 1119.450032, X, Y) && !ellipse(28788.353800, 30034.764000, 1382.584040, 1382.584040, 0.000000, X, Y) && !ellipse(28641.800000, 30075.186000, 1333.632038, 1333.632038, 0.000000, X, Y) && !ellipse(27999.983521, 30306.269409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.136000, 30012.226200, 2608.360075, 2608.360075, 0.000000, X, Y)
[Tue May 22 18:35:51 2012] Writing fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2.gif
[Tue May 22 18:39:03 2012] Mean detx,y = (-2818.09, 3895.96) 
[Tue May 22 18:39:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 18:39:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 18:39:41 2012] Setting source spectrum file to fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 18:39:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 22 21:31:06 2012] Updating aperture counts using extracted products
[Tue May 22 21:31:06 2012] Error reading totcts from fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 21:31:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 21:31:09 2012] Using photon index=1.80, rate=0.0193, arf fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2.arf
[Tue May 22 21:31:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 21:31:09 2012] Updating source flux to 7.3e-14
[Tue May 22 21:35:00 2012] Reading fit data from xmm0081340801/analysis//spectral/fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_pl.csv
[Tue May 22 21:35:00 2012] Spectral fit parameter nH value = 1.24982e+20
[Tue May 22 21:35:00 2012] Spectral fit parameter PhoIndex value = 2.75929
[Tue May 22 21:35:00 2012] Failed to get F(0.3-8.0) from xmm0081340801/analysis//spectral/fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue May 22 21:35:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 21:35:00 2012] Using Nh = 1.2e+20, photon index=2.76, rate=0.0193, arf fullrun_pn_xmm0081340801_pi300-10000_pass1_cl_src2.arf
[Tue May 22 21:35:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 21:35:00 2012] Updating source flux to 4.6e-14