[Tue May 22 10:23:08 2012] Detection parameters:
  Position = (317.6, 201.5) = 12 13 39.27 2 43 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.1 +/- 8.2
  Background counts = 7.8
  Rate = 0.003 +/- 0.0005

[Tue May 22 10:23:08 2012] Off-axis axis estimate = 7.17'
[Tue May 22 12:32:40 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Tue May 22 12:32:40 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Tue May 22 12:32:40 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.765
[Tue May 22 12:32:40 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.01"
[Tue May 22 13:36:12 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18.ximg exists
[Tue May 22 13:36:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18.csv
[Tue May 22 13:36:12 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue May 22 13:36:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18.csv
[Tue May 22 13:36:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:36:12 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue May 22 13:36:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 22 13:36:12 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue May 22 13:36:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue May 22 13:36:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340801_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:42:38 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.955347 pixels away
[Tue May 22 14:42:38 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:42:38 2012] Assessing source extent using major
[Tue May 22 14:42:38 2012] Source does appear to be extended
[Tue May 22 14:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 16:49:18 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Tue May 22 16:49:18 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Tue May 22 16:49:18 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.765
[Tue May 22 16:49:18 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.01"
[Tue May 22 17:41:31 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 22 17:41:31 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 22 17:41:31 2012] Fit fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_src17 appears to have run properly
[Tue May 22 17:41:31 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 22 17:41:31 2012] fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 22 17:41:31 2012] Fit fullrun_mos1_xmm0081340801_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue May 22 18:35:24 2012] Spatial fit model total counts = 99.445500, observed total counts = 98.000000
[Tue May 22 18:35:24 2012] Offset between fit and detection position for source 27 = 0.135448 pixels
[Tue May 22 18:35:24 2012] 95.870600 total counts/ 71.798000 bgd. counts: snr = 2.840971
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.135448 pixels
  Position = (317.8, 201.5) = 12 13 39.24 2 43 20.7
  Extent = 3.3 (2.5-5.0)", rotation angle = 0
  Source counts = 24.1 +/- 9.8
  Background counts = 71.8
  Rate = 0.001 +/- 0.0004
[Tue May 22 18:35:24 2012] Vigneting correction estimate = 1.000000
[Tue May 22 18:35:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 18:35:24 2012] Assessing source extent using major axis lower bound
[Tue May 22 18:35:24 2012] Source does appear to be extended
[Tue May 22 18:35:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 20:20:20 2012] XMMSAS src. selection expression = ellipse(27597.728400, 17483.137600, 200.117406, 200.117406, 0.000000, X, Y)
[Tue May 22 20:20:20 2012] Writing source region out to fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27_src.reg
[Tue May 22 20:20:20 2012] Extracting stamp from image fullrun_mos1_xmm0081340801_pi300-10000_cl_sm2.00.img.gz, (306, 190) - (329, 213)
[Tue May 22 20:20:20 2012] XMMSAS bgd. selection expression = annulus(27597.728400, 17483.137600, 333.529010, 667.058019, X, Y)
[Tue May 22 20:20:20 2012] Writing fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27.gif
[Tue May 22 20:30:26 2012] Mean detx,y = (6968.40, 634.77) 
[Tue May 22 20:30:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 20:30:46 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 20:30:46 2012] Setting source spectrum file to fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 22 20:30:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue May 22 20:59:00 2012] Not generating rmf since there are only 24 counts
[Tue May 22 20:59:00 2012] rmf not generated due to insufficient counts
[Tue May 22 21:31:13 2012] Updating aperture counts using extracted products
[Tue May 22 21:31:13 2012] Error reading totcts from fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 22 21:31:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 21:31:15 2012] Using photon index=1.80, rate=0.00107, arf fullrun_mos1_xmm0081340801_pi300-10000_pass1_cl_src27.arf
[Tue May 22 21:31:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 21:31:15 2012] Updating source flux to 2.4e-14
[Tue May 22 21:31:21 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting