[Sat May 18 00:42:15 2013] Detection parameters:
  Position = (376.5, 275.2) = 17 22 56.60 -0 17 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 9.9
  Background counts = 20.9
  Rate = 0.004 +/- 0.0009

[Sat May 18 00:42:16 2013] Off-axis axis estimate = 5.90'
[Sat May 18 00:42:55 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sat May 18 00:42:55 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Sat May 18 00:42:55 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sat May 18 00:42:55 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.38"
[Sat May 18 00:42:57 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 18 00:42:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5.csv
[Sat May 18 00:42:57 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 18 00:42:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5.csv
[Sat May 18 00:42:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 00:42:57 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 18 00:42:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 18 00:42:57 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 18 00:42:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 18 00:42:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 00:43:05 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.011391 pixels away
[Sat May 18 00:43:05 2013] Vigneting correction estimate = 1.000000
[Sat May 18 00:43:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 00:43:05 2013] Assessing source extent using major
[Sat May 18 00:43:05 2013] Source does appear to be extended
[Sat May 18 00:43:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:43:18 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sat May 18 00:43:18 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Sat May 18 00:43:18 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sat May 18 00:43:18 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.38"
[Sat May 18 00:43:21 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 18 00:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5.csv
[Sat May 18 00:43:21 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 18 00:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5.csv
[Sat May 18 00:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 00:43:22 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 18 00:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 18 00:43:22 2013] fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 18 00:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 18 00:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 00:43:33 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.238193 pixels away
[Sat May 18 00:43:33 2013] Vigneting correction estimate = 1.000000
[Sat May 18 00:43:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 00:43:33 2013] Assessing source extent using major
[Sat May 18 00:43:33 2013] Source does appear to be extended
[Sat May 18 00:43:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:57:46 2013] XMMSAS src. selection expression = ellipse(32707.499146, 23897.718994, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 00:57:46 2013] Not overwriting source region fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src.reg
[Sat May 18 00:57:46 2013] Extracting stamp from image fullrun_mos1_xmm0081340601_pi300-10000_cl_sm2.00.img.gz, (339, 238) - (414, 313)
[Sat May 18 00:57:46 2013] XMMSAS bgd. selection expression = annulus(32707.499146, 23897.718994, 1087.500000, 2175.000000, X, Y)
[Sat May 18 00:57:46 2013] Writing fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2.gif
[Sat May 18 00:57:46 2013] ../../xmm0081340601/products/events/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0081340601/products/events/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat May 18 00:57:46 2013] Mean detx,y = (2017.56, -7589.40) 
[Sat May 18 00:57:46 2013] ../../xmm0081340601/products/images/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src.img and ../../xmm0081340601/products/images/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat May 18 00:57:46 2013] ../../xmm0081340601/products/spectra/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0081340601/products/spectra/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat May 18 00:57:46 2013] Setting source spectrum file to fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 18 00:57:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 18 00:57:46 2013] ../../xmm0081340601/products/lightcurves/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0081340601/products/lightcurves/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat May 18 00:57:48 2013] Not generating rmf since there are only 44 counts
[Sat May 18 00:57:48 2013] rmf not generated due to insufficient counts
[Sat May 18 00:57:48 2013] fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sat May 18 00:58:51 2013] Updating aperture counts using extracted products
[Sat May 18 00:58:51 2013] Total counts from fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 82.00
[Sat May 18 00:58:51 2013] Total counts from fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 476.00
[Sat May 18 00:58:51 2013] Got source and background scale factors 1291884.000000, 9732906.000000
[Sat May 18 00:58:51 2013] User source parameters:
  Position = (376.5, 275.2) = 17 22 56.60 -0 17 6.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18.8 +/- 10.1
  Background aperture counts = 63.2
  Rate = 0.001 +/- 0.0006

[Sat May 18 00:58:51 2013] Updating counts from extracted products
[Sat May 18 00:58:51 2013] Set source signif. to 18.82/7.95 = 2.37
[Sat May 18 00:58:51 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 00:58:51 2013] Using photon index=1.80, rate=0.00119, arf fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2.arf
[Sat May 18 00:58:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 00:58:52 2013] Updating source flux to 1.9e-14
[Sat May 18 00:58:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 00:58:56 2013] xmm0081340601/analysis//spectral/fullrun_mos1_xmm0081340601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete