[Sat May 19 02:02:43 2012] Detection parameters:
  Position = (280.0, 284.9) = 20 58 26.77 -42 38 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.7 +/- 22.9
  Background counts = 40.7
  Rate = 0.01 +/- 0.001

[Sat May 19 02:02:43 2012] Off-axis axis estimate = 1.65'
[Sat May 19 02:46:39 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat May 19 02:46:39 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat May 19 02:46:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat May 19 02:46:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.26"
[Sat May 19 03:03:49 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 03:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3.csv
[Sat May 19 03:03:49 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 03:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3.csv
[Sat May 19 03:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 03:03:49 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 03:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 03:03:49 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 03:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 03:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 03:03:58 2012] Source 4 is offset by -6.625254 and -6.740336 pixels which is larger than
2 X fitted extent = 0.833986 x 0.833986, not incorporating fit results
[Sat May 19 03:03:58 2012] Vigneting correction estimate = 1.000000
[Sat May 19 03:03:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 03:03:58 2012] Assessing source extent using major
[Sat May 19 03:03:58 2012] Source does appear to be extended
[Sat May 19 03:03:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 03:43:37 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat May 19 03:43:37 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat May 19 03:43:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat May 19 03:43:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.26"
[Sat May 19 04:00:54 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 04:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3.csv
[Sat May 19 04:00:54 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 04:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3.csv
[Sat May 19 04:00:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 04:00:54 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 04:00:54 2012] fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 04:00:54 2012] Fit fullrun_mos2_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat May 19 04:01:04 2012] Spatial fit model total counts = 384.558000, observed total counts = 369.000000
[Sat May 19 04:01:04 2012] Offset between fit and detection position for source 4 = 0.064977 pixels
[Sat May 19 04:01:04 2012] 384.943000 total counts/ 188.457000 bgd. counts: snr = 14.312829
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.064977 pixels
  Position = (280.1, 284.9) = 20 58 26.75 -42 38 59.7
  Extent = 7.1 (6.1-8.2)", rotation angle = 0
  Source counts = 196.5 +/- 19.6
  Background counts = 188.5
  Rate = 0.01 +/- 0.001
[Sat May 19 04:01:04 2012] Vigneting correction estimate = 1.000000
[Sat May 19 04:01:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 04:01:04 2012] Assessing source extent using major axis lower bound
[Sat May 19 04:01:04 2012] Source does appear to be extended
[Sat May 19 04:01:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 04:39:39 2012] XMMSAS src. selection expression = ellipse(24321.205800, 24740.759660, 425.651412, 425.651412, 0.000000, X, Y)
[Sat May 19 04:39:39 2012] Writing source region out to fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4_src.reg
[Sat May 19 04:39:39 2012] Extracting stamp from image fullrun_mos2_xmm0081340401_pi300-10000_cl_sm2.00.img.gz, (256, 260) - (305, 309)
[Sat May 19 04:39:39 2012] XMMSAS bgd. selection expression = annulus(24321.205800, 24740.759660, 709.419020, 1418.838041, X, Y)
[Sat May 19 04:39:39 2012] Writing fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4.gif
[Sat May 19 04:40:03 2012] Mean detx,y = (55.41, 0.77) 
[Sat May 19 04:40:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 04:40:11 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 04:40:12 2012] Setting source spectrum file to fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 04:40:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 19 04:56:26 2012] Updating aperture counts using extracted products
[Sat May 19 04:56:26 2012] Error reading totcts from fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 04:56:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 04:56:26 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos2_xmm0081340401_pi300-10000_pass1_cl_src4.arf
[Sat May 19 04:56:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 04:56:26 2012] Updating source flux to 1.3e-13
[Sat May 19 04:56:50 2012] Flag b found in src. 4 procflags, skipping spectral fitting