[Sat May 19 02:02:23 2012] Detection parameters:
  Position = (272.3, 318.2) = 20 58 29.81 -42 36 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1062.4 +/- 40.4
  Background counts = 39.0
  Rate = 0.05 +/- 0.002

[Sat May 19 02:02:23 2012] Off-axis axis estimate = 2.38'
[Sat May 19 02:30:26 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat May 19 02:30:26 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sat May 19 02:30:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Sat May 19 02:30:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.62"
[Sat May 19 02:46:39 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 19 02:46:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1.csv
[Sat May 19 02:46:39 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 19 02:46:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1.csv
[Sat May 19 02:46:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 02:46:39 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 19 02:46:39 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 19 02:46:39 2012] Fit fullrun_mos1_xmm0081340401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 19 03:03:56 2012] Spatial fit model total counts = 953.999000, observed total counts = 954.000000
[Sat May 19 03:03:56 2012] Offset between fit and detection position for source 5 = 0.200236 pixels
[Sat May 19 03:03:56 2012] 960.002000 total counts/ 408.734000 bgd. counts: snr = 27.267317
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.200236 pixels
  Position = (272.2, 318.4) = 20 58 29.86 -42 36 34.2
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 551.3 +/- 31.0
  Background counts = 408.7
  Rate = 0.03 +/- 0.002
[Sat May 19 03:03:56 2012] Vigneting correction estimate = 1.000000
[Sat May 19 03:03:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 03:03:56 2012] Assessing source extent using major axis lower bound
[Sat May 19 03:03:56 2012] Source does appear to be extended
[Sat May 19 03:03:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 03:29:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 03:29:37 2012] Initial guess for spatial extent in simple fitting = 5.12"
[Sat May 19 03:29:37 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.801
[Sat May 19 03:29:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.12"
[Sat May 19 03:43:37 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 03:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1.csv
[Sat May 19 03:43:37 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 03:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1.csv
[Sat May 19 03:43:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 03:43:37 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 03:43:37 2012] fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 03:43:37 2012] Fit fullrun_mos1_xmm0081340401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 04:01:01 2012] Spatial fit model total counts = 954.000000, observed total counts = 954.000000
[Sat May 19 04:01:01 2012] Offset between fit and detection position for source 5 = 0.000004 pixels
[Sat May 19 04:01:01 2012] 960.003000 total counts/ 408.729000 bgd. counts: snr = 27.267780
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000004 pixels
  Position = (272.2, 318.4) = 20 58 29.86 -42 36 34.2
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 551.3 +/- 31.0
  Background counts = 408.7
  Rate = 0.03 +/- 0.002
[Sat May 19 04:01:01 2012] Vigneting correction estimate = 1.000000
[Sat May 19 04:01:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 04:01:01 2012] Assessing source extent using major axis lower bound
[Sat May 19 04:01:01 2012] Source does appear to be extended
[Sat May 19 04:01:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 04:22:53 2012] XMMSAS src. selection expression = ellipse(23633.351260, 27651.263600, 307.049409, 307.049409, 0.000000, X, Y)
[Sat May 19 04:22:53 2012] Writing source region out to fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_src.reg
[Sat May 19 04:22:53 2012] Extracting stamp from image fullrun_mos1_xmm0081340401_pi300-10000_cl_sm2.00.img.gz, (255, 301) - (290, 336)
[Sat May 19 04:22:53 2012] XMMSAS bgd. selection expression = annulus(23633.351260, 27651.263600, 511.749015, 1023.498029, X, Y)
[Sat May 19 04:22:53 2012] Writing fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5.gif
[Sat May 19 04:22:55 2012] Mean detx,y = (-2332.92, 1345.26) 
[Sat May 19 04:22:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 04:23:04 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 04:23:04 2012] Setting source spectrum file to fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 19 04:23:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May 19 04:56:26 2012] Updating aperture counts using extracted products
[Sat May 19 04:56:26 2012] Error reading totcts from fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 19 04:56:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 04:56:26 2012] Using photon index=1.80, rate=0.0323, arf fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5.arf
[Sat May 19 04:56:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 04:56:26 2012] Updating source flux to 3.9e-13
[Sat May 19 04:56:50 2012] Reading fit data from xmm0081340401/analysis//spectral/fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_pl.csv
[Sat May 19 04:56:50 2012] Spectral fit parameter nH value = 9.71925e+20
[Sat May 19 04:56:50 2012] Spectral fit parameter PhoIndex value = 1.83535
[Sat May 19 04:56:50 2012] Failed to get F(0.3-8.0) from xmm0081340401/analysis//spectral/fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat May 19 04:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 04:56:50 2012] Using Nh = 9.7e+20, photon index=1.84, rate=0.0323, arf fullrun_mos1_xmm0081340401_pi300-10000_pass1_cl_src5.arf
[Sat May 19 04:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 04:56:50 2012] Updating source flux to 4.2e-13