[Thu Sep  6 08:00:45 2012] Detection parameters:
  Position = (454.4, 264.1) = 23 14 30.98 -59 6 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.5 +/- 17.2
  Background counts = 53.8
  Rate = 0.006 +/- 0.0007

[Thu Sep  6 08:00:45 2012] Off-axis axis estimate = 11.58'
[Thu Sep  6 08:18:24 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 08:18:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 08:18:24 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Thu Sep  6 08:18:24 2012] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.913
[Thu Sep  6 08:18:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.22"
[Thu Sep  6 08:27:03 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Sep  6 08:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3.csv
[Thu Sep  6 08:27:03 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Sep  6 08:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3.csv
[Thu Sep  6 08:27:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 08:27:03 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep  6 08:27:03 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep  6 08:27:03 2012] Fit fullrun_mos2_xmm0081340301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep  6 08:27:07 2012] Spatial fit model total counts = 165.248000, observed total counts = 165.000000
[Thu Sep  6 08:27:07 2012] Offset between fit and detection position for source 1 = 0.271988 pixels
[Thu Sep  6 08:27:07 2012] 168.521100 total counts/ 119.338000 bgd. counts: snr = 4.502218
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.271988 pixels
  Position = (454.3, 264.4) = 23 14 31.05 -59 6 24.6
  Extent = 4.9 (4.1-5.9)", rotation angle = 0
  Source counts = 49.2 +/- 13.0
  Background counts = 119.3
  Rate = 0.003 +/- 0.0009
[Thu Sep  6 08:27:07 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 08:27:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 08:27:07 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 08:27:07 2012] Source does appear to be extended
[Thu Sep  6 08:27:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 08:43:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 08:43:37 2012] Initial guess for spatial extent in simple fitting = 4.87"
[Thu Sep  6 08:43:37 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.857
[Thu Sep  6 08:43:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.87"
[Thu Sep  6 08:51:27 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Sep  6 08:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3.csv
[Thu Sep  6 08:51:27 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Sep  6 08:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3.csv
[Thu Sep  6 08:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 08:51:27 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep  6 08:51:27 2012] fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep  6 08:51:27 2012] Fit fullrun_mos2_xmm0081340301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep  6 08:51:31 2012] Spatial fit model total counts = 141.481000, observed total counts = 139.000000
[Thu Sep  6 08:51:31 2012] Offset between fit and detection position for source 1 = 0.025477 pixels
[Thu Sep  6 08:51:31 2012] 144.486600 total counts/ 93.046200 bgd. counts: snr = 5.332797
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025477 pixels
  Position = (454.3, 264.4) = 23 14 31.06 -59 6 24.6
  Extent = 4.9 (4.0-6.0)", rotation angle = 0
  Source counts = 51.4 +/- 12.0
  Background counts = 93.0
  Rate = 0.004 +/- 0.0008
[Thu Sep  6 08:51:31 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 08:51:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 08:51:31 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 08:51:31 2012] Source does appear to be extended
[Thu Sep  6 08:51:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 08:57:14 2012] XMMSAS src. selection expression = ellipse(39474.279200, 22952.969600, 291.663608, 291.663608, 0.000000, X, Y)
[Thu Sep  6 08:57:14 2012] Writing source region out to fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 08:57:14 2012] Extracting stamp from image fullrun_mos2_xmm0081340301_pi300-10000_cl_sm2.00.img.gz, (438, 248) - (471, 281)
[Thu Sep  6 08:57:14 2012] XMMSAS bgd. selection expression = annulus(39474.279200, 22952.969600, 486.106014, 972.212028, X, Y) && !ellipse(40141.573200, 22242.889200, 325.898409, 325.898409, 0.000000, X, Y)
[Thu Sep  6 08:57:14 2012] Writing fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 08:57:29 2012] Mean detx,y = (-11926.22, 2881.35) 
[Thu Sep  6 08:57:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 08:57:33 2012] grppha failed
[Thu Sep  6 08:57:34 2012] Setting source spectrum file to fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 08:57:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 08:58:27 2012] Not generating rmf since there are only 51 counts
[Thu Sep  6 08:58:27 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:58:53 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:58:53 2012] Error reading totcts from fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 08:58:53 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:58:55 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep  6 08:58:56 2012] xmm0081340301/analysis//spectral/fullrun_mos2_xmm0081340301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete