[Tue May 7 15:48:01 2013] Detection parameters: Position = (302.9, 334.3) = 12 56 11.46 56 53 27.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 85.6 +/- 12.6 Background counts = 17.7 Rate = 0.007 +/- 0.001 [Tue May 7 15:48:02 2013] Off-axis axis estimate = 2.62' [Tue May 7 15:49:56 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting [Tue May 7 15:49:56 2013] Initial guess for spatial extent in simple fitting = 7.74" [Tue May 7 15:49:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.818 [Tue May 7 15:49:56 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.74" [Tue May 7 16:53:00 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17.ximg exists [Tue May 7 16:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17.csv [Tue May 7 16:53:00 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17_1.ximg exists [Tue May 7 16:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17.csv [Tue May 7 16:53:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 16:53:00 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Tue May 7 16:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue May 7 16:53:00 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Tue May 7 16:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue May 7 16:53:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:55:29 2013] Source 17 is offset by 6.799378 and 6.429662 pixels which is larger than 2 X fitted extent = 1.359067 x 1.359067, not incorporating fit results [Tue May 7 17:55:29 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:55:29 2013] Assessing source extent using major [Tue May 7 17:55:29 2013] Source does appear to be extended [Tue May 7 17:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 17:55:46 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting [Tue May 7 17:55:46 2013] Initial guess for spatial extent in simple fitting = 7.74" [Tue May 7 17:55:46 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.818 [Tue May 7 17:55:46 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.74" [Tue May 7 18:50:04 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16.ximg exists [Tue May 7 18:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16.csv [Tue May 7 18:50:04 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16_1.ximg exists [Tue May 7 18:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16.csv [Tue May 7 18:50:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 18:50:04 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Tue May 7 18:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16.csv [Tue May 7 18:50:04 2013] fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Tue May 7 18:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16.csv [Tue May 7 18:50:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 19:48:31 2013] Source 17 is offset by 7.025884 and 6.429662 pixels which is larger than 2 X fitted extent = 7.116460 x 0.889559, not incorporating fit results [Tue May 7 19:48:31 2013] Vigneting correction estimate = 1.000000 [Tue May 7 19:48:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 19:48:31 2013] Assessing source extent using major [Tue May 7 19:48:31 2013] Source does appear to be extended [Tue May 7 19:48:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 19:48:48 2013] XMMSAS src. selection expression = ellipse(26304.619873, 29036.748566, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 19:48:48 2013] Writing source region out to fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_src.reg [Tue May 7 19:48:48 2013] Extracting stamp from image fullrun_pn_xmm0081340201_pi300-10000_cl_sm2.00.img.gz, (265, 297) - (340, 372) [Tue May 7 19:48:48 2013] XMMSAS bgd. selection expression = annulus(26304.619873, 29036.748566, 1087.500000, 2175.000000, X, Y) && !ellipse(25829.012200, 27983.582800, 502.687214, 502.687214, 0.000000, X, Y) [Tue May 7 19:48:48 2013] Writing fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17.gif [Tue May 7 19:55:20 2013] Mean detx,y = (1074.38, -717.72) [Tue May 7 19:55:22 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 19:55:37 2013] Binned source spectrum to 10 counts/bin [Tue May 7 19:55:37 2013] Setting source spectrum file to fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Tue May 7 19:55:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_bgd.pi.gz [Tue May 7 20:18:38 2013] Not generating rmf since there are only 85 counts [Tue May 7 20:18:38 2013] rmf not generated due to insufficient counts [Tue May 7 20:54:30 2013] Updating aperture counts using extracted products [Tue May 7 20:54:30 2013] Total counts from fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 202.00 [Tue May 7 20:54:30 2013] Total counts from fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1208.00 [Tue May 7 20:54:30 2013] Got source and background scale factors 1067933.000000, 9330970.000000 [Tue May 7 20:54:30 2013] User source parameters: Position = (302.9, 334.3) = 12 56 11.46 56 53 27.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 63.7 +/- 15.2 Background aperture counts = 138.3 Rate = 0.003 +/- 0.0008 [Tue May 7 20:54:30 2013] Updating counts from extracted products [Tue May 7 20:54:30 2013] Set source signif. to 63.74/11.76 = 5.42 [Tue May 7 20:54:35 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 20:54:35 2013] Using photon index=1.80, rate=0.00334, arf fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17.arf [Tue May 7 20:54:35 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 20:54:35 2013] Updating source flux to 9.4e-15 [Tue May 7 20:54:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 7 20:54:46 2013] xmm0081340201/analysis//spectral/fullrun_pn_xmm0081340201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete