[Tue May  7 15:48:45 2013] Detection parameters:
  Position = (394.8, 265.0) = 12 55 22.81 56 48 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.3 +/- 8.5
  Background counts = 5.8
  Rate = 0.003 +/- 0.0006

[Tue May  7 15:48:45 2013] Off-axis axis estimate = 7.39'
[Tue May  7 17:23:30 2013] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue May  7 17:23:30 2013] Initial guess for spatial extent in simple fitting = 10.12"
[Tue May  7 17:23:30 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.126
[Tue May  7 17:23:30 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.12"
[Tue May  7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src17.ximg exists
[Tue May  7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May  7 17:55:23 2013] Fit fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue May  7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May  7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May  7 17:55:23 2013] Fit fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May  7 17:55:36 2013] Spatial fit model total counts = 70.241100, observed total counts = 69.000000
[Tue May  7 17:55:36 2013] Offset between fit and detection position for source 23 = 0.310006 pixels
[Tue May  7 17:55:36 2013] 67.730100 total counts/ 25.958600 bgd. counts: snr = 8.198595
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.310006 pixels
  Position = (394.6, 265.2) = 12 55 22.93 56 48 16.7
  Extent = 11.2 (7.3-16.0)" x 4.6 (3.5-6.4)", rotation angle = 116 (101-132) degrees
  Source counts = 41.8 +/- 8.2
  Background counts = 26.0
  Rate = 0.002 +/- 0.0004
[Tue May  7 17:55:36 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:55:36 2013] Assessing source extent using major axis lower bound
[Tue May  7 17:55:36 2013] Source does appear to be extended
[Tue May  7 17:55:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Tue May  7 19:18:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 19:18:43 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Tue May  7 19:18:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.156
[Tue May  7 19:18:43 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.94"
[Tue May  7 19:48:24 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17.ximg exists
[Tue May  7 19:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17.csv
[Tue May  7 19:48:24 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May  7 19:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17.csv
[Tue May  7 19:48:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 19:48:25 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May  7 19:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May  7 19:48:25 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May  7 19:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May  7 19:48:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 19:48:38 2013] Warning, spatial fit 17 centroid is now closest to src. 2
[Tue May  7 19:48:38 2013] Vigneting correction estimate = 1.000000
[Tue May  7 19:48:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 19:48:38 2013] Assessing source extent using major axis lower bound
[Tue May  7 19:48:38 2013] Source does appear to be extended
[Tue May  7 19:48:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Tue May  7 20:40:44 2013] XMMSAS src. selection expression = ellipse(34277.711600, 23026.919200, 674.136019, 278.815808, 115.771099, X, Y)
[Tue May  7 20:40:44 2013] Writing source region out to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_src.reg
[Tue May  7 20:40:44 2013] Extracting stamp from image fullrun_mos2_xmm0081340201_pi300-10000_cl_sm2.00.img.gz, (356, 226) - (433, 304)
[Tue May  7 20:40:44 2013] XMMSAS bgd. selection expression = annulus(34277.711600, 23026.919200, 1123.560032, 2247.120065, X, Y) && !ellipse(31806.635300, 22183.459000, 531.743425, 531.743425, 0.000000, X, Y) && !ellipse(32159.647900, 25052.885200, 654.854419, 255.336007, 13.519115, X, Y)
[Tue May  7 20:40:44 2013] Writing fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23.gif
[Tue May  7 20:43:06 2013] Mean detx,y = (-3802.22, -8952.62) 
[Tue May  7 20:43:07 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 20:43:13 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 20:43:13 2013] Setting source spectrum file to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue May  7 20:43:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue May  7 20:52:58 2013] Not generating rmf since there are only 41 counts
[Tue May  7 20:52:58 2013] rmf not generated due to insufficient counts
[Tue May  7 20:54:39 2013] Updating aperture counts using extracted products
[Tue May  7 20:54:39 2013] Total counts from fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 45.00
[Tue May  7 20:54:39 2013] Total counts from fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 351.00
[Tue May  7 20:54:39 2013] Got source and background scale factors 563780.000000, 11318329.000000
[Tue May  7 20:54:39 2013] User source parameters:
  Position = (394.6, 265.2) = 12 55 22.93 56 48 16.7
  Extent = 11.2 (7.3-16.0)" x 4.6 (3.5-6.4)", rotation angle = 116 (101-132) degrees
  Source aperture counts = 27.5 +/- 7.8
  Background aperture counts = 17.5
  Rate = 0.001 +/- 0.0004

[Tue May  7 20:54:41 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 20:54:41 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23.arf
[Tue May  7 20:54:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  7 20:54:41 2013] Updating source flux to 3.6e-14
[Tue May  7 20:54:43 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May  7 20:54:44 2013] xmm0081340201/analysis//spectral/fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete