[Tue May 7 15:48:45 2013] Detection parameters: Position = (196.6, 326.2) = 12 57 7.90 56 52 51.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 29.9 +/- 7.5 Background counts = 4.4 Rate = 0.001 +/- 0.0003 [Tue May 7 15:48:45 2013] Off-axis axis estimate = 7.65' [Tue May 7 17:23:30 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting [Tue May 7 17:23:30 2013] Initial guess for spatial extent in simple fitting = 10.26" [Tue May 7 17:23:30 2013] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.612 [Tue May 7 17:23:30 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.26" [Tue May 7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29.ximg exists [Tue May 7 17:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29.csv [Tue May 7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29_1.ximg exists [Tue May 7 17:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29.csv [Tue May 7 17:55:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Tue May 7 17:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29.csv [Tue May 7 17:55:23 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Tue May 7 17:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29.csv [Tue May 7 17:55:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:55:36 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.345201 pixels away [Tue May 7 17:55:36 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:55:36 2013] Assessing source extent using major [Tue May 7 17:55:36 2013] Source does appear to be extended [Tue May 7 17:55:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 19:18:43 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting [Tue May 7 19:18:43 2013] Initial guess for spatial extent in simple fitting = 10.26" [Tue May 7 19:18:43 2013] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.612 [Tue May 7 19:18:43 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.26" [Tue May 7 19:48:24 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29.ximg exists [Tue May 7 19:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29.csv [Tue May 7 19:48:24 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29_1.ximg exists [Tue May 7 19:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29.csv [Tue May 7 19:48:24 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 19:48:25 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Tue May 7 19:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29.csv [Tue May 7 19:48:25 2013] fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Tue May 7 19:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29.csv [Tue May 7 19:48:25 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0081340201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 19:48:38 2013] Source 14 is offset by -0.413417 and -2.230974 pixels which is larger than 2 X fitted extent = 1.183374 x 1.183374, not incorporating fit results [Tue May 7 19:48:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 19:48:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 19:48:38 2013] Assessing source extent using major [Tue May 7 19:48:38 2013] Source does appear to be extended [Tue May 7 19:48:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 20:40:44 2013] XMMSAS src. selection expression = ellipse(17053.322952, 28328.179657, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 20:40:44 2013] Writing source region out to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_src.reg [Tue May 7 20:40:44 2013] Extracting stamp from image fullrun_mos2_xmm0081340201_pi300-10000_cl_sm2.00.img.gz, (159, 289) - (234, 364) [Tue May 7 20:40:44 2013] XMMSAS bgd. selection expression = annulus(17053.322952, 28328.179657, 1087.500000, 2175.000000, X, Y) [Tue May 7 20:40:44 2013] Writing fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14.gif [Tue May 7 20:44:51 2013] Mean detx,y = (6890.16, 5684.64) [Tue May 7 20:44:52 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 20:45:08 2013] Binned source spectrum to 10 counts/bin [Tue May 7 20:45:08 2013] Setting source spectrum file to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Tue May 7 20:45:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_bgd.pi.gz [Tue May 7 20:53:47 2013] Not generating rmf since there are only 29 counts [Tue May 7 20:53:47 2013] rmf not generated due to insufficient counts [Tue May 7 20:54:40 2013] Updating aperture counts using extracted products [Tue May 7 20:54:40 2013] Total counts from fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 67.00 [Tue May 7 20:54:40 2013] Total counts from fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 243.00 [Tue May 7 20:54:40 2013] Got source and background scale factors 977836.000000, 9391205.000000 [Tue May 7 20:54:40 2013] User source parameters: Position = (196.6, 326.2) = 12 57 7.90 56 52 51.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 41.7 +/- 9.2 Background aperture counts = 25.3 Rate = 0.002 +/- 0.0004 [Tue May 7 20:54:40 2013] Updating counts from extracted products [Tue May 7 20:54:40 2013] Set source signif. to 41.70/5.03 = 8.29 [Tue May 7 20:54:41 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 20:54:41 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14.arf [Tue May 7 20:54:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 20:54:41 2013] Getting flux using calc_pl_flux failed [Tue May 7 20:54:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 7 20:54:44 2013] xmm0081340201/analysis//spectral/fullrun_mos2_xmm0081340201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete