[Sat Jun 22 01:16:55 2013] Detection parameters:
  Position = (374.8, 492.1) = 21 58 32.44 -30 0 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.9 +/- 9.4
  Background counts = 11.3
  Rate = 0.0006 +/- 0.0002

[Sat Jun 22 01:17:00 2013] Off-axis axis estimate = 15.09'
[Sat Jun 22 03:02:14 2013] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 03:02:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 03:02:14 2013] Initial guess for spatial extent in simple fitting = 13.97"
[Sat Jun 22 03:02:14 2013] source mask rpix=3.2, npix_max = 55, mask sum = 58, frac = 1.052
[Sat Jun 22 03:02:14 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 13.97"
[Sat Jun 22 05:31:34 2013] fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun 22 05:31:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 05:31:34 2013] fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun 22 05:31:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 05:31:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:31:35 2013] fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun 22 05:31:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun 22 05:31:35 2013] fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun 22 05:31:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun 22 05:31:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes