[Sat Jun 22 01:16:51 2013] Detection parameters:
  Position = (340.3, 387.1) = 21 58 43.98 -30 8 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.0 +/- 11.2
  Background counts = 26.2
  Rate = 0.001 +/- 0.0003

[Sat Jun 22 01:16:53 2013] Off-axis axis estimate = 7.11'
[Sat Jun 22 01:38:08 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:38:08 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Sat Jun 22 01:38:08 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.928
[Sat Jun 22 01:38:08 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.98"
[Sat Jun 22 03:02:13 2013] fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 22 03:02:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 03:02:13 2013] fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 22 03:02:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 03:02:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:02:14 2013] fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 22 03:02:14 2013] fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 22 03:02:14 2013] Fit fullrun_mos1_xmm0080940101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly