[Fri May 24 13:03:59 2013] Detection parameters:
  Position = (377.3, 346.1) = 1 23 39.02 33 14 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1042.3 +/- 46.1
  Background counts = 208.4
  Rate = 0.05 +/- 0.002

[Fri May 24 13:04:00 2013] Off-axis axis estimate = 6.68'
[Fri May 24 13:07:06 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:07:06 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May 24 13:07:06 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Fri May 24 13:07:06 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.77"
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4.csv
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4.csv
[Fri May 24 16:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 24 16:14:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:39 2013] Spatial fit model total counts = 8023.870000, observed total counts = 7220.000000
[Fri May 24 21:32:39 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:40 2013] Spatial fit model total counts = 4454.580000, observed total counts = 3120.000000
[Fri May 24 21:32:40 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:40 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:40 2013] Assessing source extent using major
[Fri May 24 21:32:40 2013] Source does appear to be extended
[Fri May 24 21:32:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:40 2013] Source is confused with source 6
[Fri May 24 21:33:18 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May 24 21:33:18 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May 24 21:33:18 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Fri May 24 21:33:18 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.77"
[Sat May 25 00:53:14 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 25 00:53:14 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 25 00:53:15 2013] Fit fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat May 25 00:53:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 25 00:53:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 25 00:53:27 2013] Fit fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 25 06:58:50 2013] Spatial fit model total counts = 7684.890000, observed total counts = 7220.000000
[Sat May 25 06:58:50 2013] Offset between fit and detection position for source 4 = 2.267168 pixels
[Sat May 25 06:58:50 2013] 7810.415000 total counts/ 6926.150000 bgd. counts: snr = 10.625185
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.267168 pixels
  Position = (376.0, 344.2) = 1 23 39.46 33 14 22.0
  Extent = 19.5 (19.5-39.1)" x 12.4 (9.2-15.8)", rotation angle = 136 (115-155) degrees
  Source counts = 884.3 +/- 88.4
  Background counts = 6926.1
  Rate = 0.03 +/- 0.003
[Sat May 25 06:58:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:58:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:58:50 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:58:50 2013] Source does appear to be extended
[Sat May 25 06:58:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sat May 25 06:59:23 2013] XMMSAS src. selection expression = ellipse(32662.474000, 29896.362000, 1172.070034, 745.500021, 136.335900, X, Y)
[Sat May 25 06:59:23 2013] Writing source region out to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_src.reg
[Sat May 25 06:59:23 2013] Extracting stamp from image fullrun_pn_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (309, 277) - (443, 412)
[Sat May 25 06:59:23 2013] XMMSAS bgd. selection expression = annulus(32662.474000, 29896.362000, 1953.450056, 3906.900112, X, Y) && !ellipse(32950.682000, 30838.878000, 3315.696095, 2273.072065, 19.671500, X, Y) && !ellipse(31594.763092, 30504.440796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33726.638000, 30748.780000, 3356.784097, 1988.280057, 230.393000, X, Y) && !ellipse(31826.071899, 31448.885162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31982.268000, 31119.238000, 3450.464099, 914.624026, 2.467740, X, Y) && !ellipse(30142.050537, 25702.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33460.555725, 33425.413757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33258.602000, 32477.613600, 1423.504041, 304.640809, 128.424700, X, Y) && !ellipse(31659.115692, 32049.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32118.536652, 31890.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.208000, 31949.400000, 1725.232050, 1725.232050, 0.000000, X, Y) && !ellipse(31795.183289, 29098.119568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34662.983978, 29080.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.314026, 28585.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34505.246033, 33342.821106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31861.582916, 33172.660278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31351.182739, 32901.741089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.328156, 32655.590668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31337.963348, 32489.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33559.267059, 32315.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.109802, 31854.390442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.458000, 31861.710000, 1709.888049, 1709.888049, 0.000000, X, Y) && !ellipse(35444.696000, 30083.154000, 1678.392048, 1678.392048, 0.000000, X, Y)
[Sat May 25 06:59:23 2013] Writing fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4.gif
[Sat May 25 07:09:47 2013] Mean detx,y = (4046.88, -4564.85) 
[Sat May 25 07:09:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 07:10:28 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 07:10:29 2013] Setting source spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 25 07:10:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 25 10:55:44 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:44 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 7871.00
[Sat May 25 10:55:44 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 8615.00
[Sat May 25 10:55:44 2013] Got source and background scale factors 2443415.000000, 12656576.000000
[Sat May 25 10:55:44 2013] User source parameters:
  Position = (376.0, 344.2) = 1 23 39.46 33 14 22.0
  Extent = 19.5 (19.5-39.1)" x 12.4 (9.2-15.8)", rotation angle = 136 (115-155) degrees
  Source aperture counts = 6207.8 +/- 89.7
  Background aperture counts = 1663.2
  Rate = 0.2 +/- 0.003

[Sat May 25 10:55:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:55:53 2013] Using photon index=1.80, rate=0.0289, arf fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4.arf
[Sat May 25 10:55:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:55:53 2013] Updating source flux to 1e-13
[Sat May 25 10:56:26 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Sat May 25 10:56:26 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Sat May 25 10:56:35 2013] xmm0080540101/analysis//spectral/fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete