[Fri May 24 13:03:59 2013] Detection parameters:
  Position = (366.0, 335.0) = 1 23 42.92 33 13 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.5 +/- 25.6
  Background counts = 187.6
  Rate = 0.02 +/- 0.001

[Fri May 24 13:04:00 2013] Off-axis axis estimate = 5.57'
[Fri May 24 13:07:06 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:07:06 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri May 24 13:07:06 2013] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.693
[Fri May 24 13:07:06 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 9.21"
[Fri May 24 16:14:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22.ximg exists
[Fri May 24 16:14:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22.csv
[Fri May 24 16:14:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri May 24 16:14:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22.csv
[Fri May 24 16:14:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May 24 16:14:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:40 2013] Warning, spatial fit 22 centroid is now closest to src. 4
[Fri May 24 21:32:40 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:40 2013] Assessing source extent using major
[Fri May 24 21:32:40 2013] Source does appear to be extended
[Fri May 24 21:32:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:40 2013] Source is confused with source 25
[Fri May 24 21:33:18 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri May 24 21:33:18 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri May 24 21:33:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.693
[Fri May 24 21:33:18 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.21"
[Sat May 25 00:53:19 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21.ximg exists
[Sat May 25 00:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21.csv
[Sat May 25 00:53:19 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat May 25 00:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21.csv
[Sat May 25 00:53:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:53:31 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat May 25 00:53:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat May 25 00:53:31 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat May 25 00:53:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat May 25 00:53:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:50 2013] Source 23 is offset by -8.453594 and -4.758947 pixels which is larger than
2 X fitted extent = 8.370851 x 8.370851, not incorporating fit results
[Sat May 25 06:58:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:58:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:58:50 2013] Assessing source extent using major
[Sat May 25 06:58:50 2013] Source does appear to be extended
[Sat May 25 06:58:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 06:59:23 2013] XMMSAS src. selection expression = ellipse(31795.183289, 29098.119568, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 06:59:23 2013] Writing source region out to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_src.reg
[Sat May 25 06:59:23 2013] Extracting stamp from image fullrun_pn_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (329, 298) - (404, 373)
[Sat May 25 06:59:23 2013] XMMSAS bgd. selection expression = annulus(31795.183289, 29098.119568, 1087.500000, 2175.000000, X, Y) && !ellipse(32950.682000, 30838.878000, 3315.696095, 2273.072065, 19.671500, X, Y) && !ellipse(31594.763092, 30504.440796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.474000, 29896.362000, 1562.760045, 994.000029, 136.335900, X, Y) && !ellipse(33726.638000, 30748.780000, 3356.784097, 1988.280057, 230.393000, X, Y) && !ellipse(31826.071899, 31448.885162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31982.268000, 31119.238000, 3450.464099, 914.624026, 2.467740, X, Y) && !ellipse(33258.602000, 32477.613600, 1423.504041, 304.640809, 128.424700, X, Y) && !ellipse(31659.115692, 32049.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32118.536652, 31890.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.208000, 31949.400000, 1725.232050, 1725.232050, 0.000000, X, Y) && !ellipse(34662.983978, 29080.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.314026, 28585.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.109802, 31854.390442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.458000, 31861.710000, 1709.888049, 1709.888049, 0.000000, X, Y) && !ellipse(35444.696000, 30083.154000, 1678.392048, 1678.392048, 0.000000, X, Y)
[Sat May 25 06:59:23 2013] Writing fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23.gif
[Sat May 25 07:33:24 2013] Mean detx,y = (3566.82, -3500.84) 
[Sat May 25 07:33:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 07:33:46 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 07:33:46 2013] Setting source spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat May 25 07:33:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat May 25 08:20:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 08:20:11 2013] rmf not generated due to insufficient counts
[Sat May 25 10:55:47 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:47 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 2051.00
[Sat May 25 10:55:47 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 2758.00
[Sat May 25 10:55:47 2013] Got source and background scale factors 1027930.000000, 3729237.000000
[Sat May 25 10:55:48 2013] User source parameters:
  Position = (366.0, 335.0) = 1 23 42.92 33 13 46.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1290.8 +/- 46.3
  Background aperture counts = 760.2
  Rate = 0.04 +/- 0.002

[Sat May 25 10:55:48 2013] Updating counts from extracted products
[Sat May 25 10:55:48 2013] Set source signif. to 1290.78/27.57 = 46.81
[Sat May 25 10:55:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:55:54 2013] Using photon index=1.80, rate=0.0423, arf fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23.arf
[Sat May 25 10:55:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:55:54 2013] Updating source flux to 2.2e-13
[Sat May 25 10:56:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 10:56:35 2013] xmm0080540101/analysis//spectral/fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete