[Fri May 24 13:03:59 2013] Detection parameters:
  Position = (372.5, 378.9) = 1 23 40.66 33 16 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 411.2 +/- 29.4
  Background counts = 151.6
  Rate = 0.02 +/- 0.002

[Fri May 24 13:04:00 2013] Off-axis axis estimate = 7.93'
[Fri May 24 13:07:06 2013] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:07:06 2013] Initial guess for spatial extent in simple fitting = 10.39"
[Fri May 24 13:07:06 2013] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.839
[Fri May 24 13:07:06 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.39"
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9.csv
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9.csv
[Fri May 24 16:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 24 16:14:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:39 2013] Warning, spatial fit 9 centroid is now closest to src. 17
[Fri May 24 21:32:40 2013] Spatial fit model total counts = 3793.350000, observed total counts = 2759.000000
[Fri May 24 21:32:40 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:40 2013] Spatial fit model total counts = 3835.560000, observed total counts = 3593.000000
[Fri May 24 21:32:40 2013] Offset between fit and detection position for source 10 = 0.680878 pixels
[Fri May 24 21:32:40 2013] Warning, changing simple spatial fit ID from 9 to 15
[Fri May 24 21:32:40 2013] 3667.580000 total counts/ 3667.580000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.680878 pixels
  Position = (373.1, 379.1) = 1 23 40.44 33 16 54.0
  Extent = 2.5 (2.5-37.2)", rotation angle = 0
  Source counts = 0.0 +/- 60.6
  Background counts = 3667.6
  Rate = 3e-17 +/- 0.002
  Deleting source due to low Poisson probability