[Fri May 24 13:03:59 2013] Detection parameters:
  Position = (375.2, 357.8) = 1 23 39.72 33 15 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3059.0 +/- 67.7
  Background counts = 198.7
  Rate = 0.2 +/- 0.004

[Fri May 24 13:04:00 2013] Off-axis axis estimate = 7.04'
[Fri May 24 13:07:06 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:07:06 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Fri May 24 13:07:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.869
[Fri May 24 13:07:06 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.95"
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 16:14:26 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 24 16:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 16:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 16:14:28 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 24 16:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 16:14:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:39 2013] Spatial fit model total counts = 11768.800000, observed total counts = 9326.000000
[Fri May 24 21:32:39 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:39 2013] Spatial fit model total counts = 6342.160000, observed total counts = 4000.000000
[Fri May 24 21:32:39 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:40 2013] Spatial fit model total counts = 5016.610000, observed total counts = 3567.000000
[Fri May 24 21:32:40 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:40 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.392061 pixels away
[Fri May 24 21:32:40 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:40 2013] Assessing source extent using major
[Fri May 24 21:32:40 2013] Source does appear to be extended
[Fri May 24 21:32:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:33:18 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Fri May 24 21:33:18 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Fri May 24 21:33:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.869
[Fri May 24 21:33:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.95"
[Sat May 25 00:53:13 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 25 00:53:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1.csv
[Sat May 25 00:53:14 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 25 00:53:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1.csv
[Sat May 25 00:53:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:53:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 25 00:53:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 25 00:53:27 2013] fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 25 00:53:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 25 00:53:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:50 2013] Spatial fit model total counts = 11697.300000, observed total counts = 9326.000000
[Sat May 25 06:58:50 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 06:58:50 2013] Spatial fit model total counts = 18668.400000, observed total counts = 18416.000000
[Sat May 25 06:58:50 2013] Offset between fit and detection position for source 1 = 4.927638 pixels
[Sat May 25 06:58:50 2013] Warning, changing simple spatial fit ID from 1 to 6
[Sat May 25 06:58:50 2013] 18338.100000 total counts/ 9093.400000 bgd. counts: snr = 96.945951
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.927638 pixels
  Position = (379.3, 355.0) = 1 23 38.31 33 15 9.1
  Extent = 41.4 (41.0-82.9)" x 28.4 (26.8-29.8)", rotation angle = 20 (16-23) degrees
  Source counts = 9244.7 +/- 135.4
  Background counts = 9093.4
  Rate = 0.3 +/- 0.004
[Sat May 25 06:58:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:58:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:58:50 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:58:50 2013] Source does appear to be extended
[Sat May 25 06:58:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.37
[Sat May 25 06:58:50 2013] Source is confused with source 3
[Sat May 25 06:58:50 2013] Source is confused with source 4
[Sat May 25 06:58:50 2013] Source is confused with source 6
[Sat May 25 06:58:50 2013] Source is confused with source 7
[Sat May 25 06:58:50 2013] Source is confused with source 8
[Sat May 25 06:58:50 2013] Source is confused with source 15
[Sat May 25 06:58:50 2013] Source is confused with source 16
[Sat May 25 06:58:50 2013] Source is confused with source 17
[Sat May 25 06:58:50 2013] Source is confused with source 18
[Sat May 25 06:58:50 2013] Source is confused with source 23
[Sat May 25 06:58:50 2013] Source is confused with source 24
[Sat May 25 06:58:50 2013] Source is confused with source 44
[Sat May 25 06:58:50 2013] Source is confused with source 45
[Sat May 25 06:59:23 2013] Counts = 9244.700000, rescaling region sizes by 2.000000
[Sat May 25 06:59:23 2013] XMMSAS src. selection expression = ellipse(32950.682000, 30838.878000, 4973.544143, 3409.608098, 19.671500, X, Y)
[Sat May 25 06:59:23 2013] Writing source region out to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 25 06:59:23 2013] Extracting stamp from image fullrun_pn_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (93, 69) - (595, 595)
[Sat May 25 06:59:23 2013] XMMSAS bgd. selection expression = annulus(32950.682000, 30838.878000, 16578.480477, 33156.960954, X, Y) && !ellipse(40712.205383, 31098.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31594.763092, 30504.440796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.474000, 29896.362000, 1562.760045, 994.000029, 136.335900, X, Y) && !ellipse(39689.881042, 25784.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33726.638000, 30748.780000, 3356.784097, 1988.280057, 230.393000, X, Y) && !ellipse(31826.071899, 31448.885162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31982.268000, 31119.238000, 3450.464099, 914.624026, 2.467740, X, Y) && !ellipse(30142.050537, 25702.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24831.211365, 39189.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22094.557175, 37814.301971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33460.555725, 33425.413757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33258.602000, 32477.613600, 1423.504041, 304.640809, 128.424700, X, Y) && !ellipse(31659.115692, 32049.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32118.536652, 31890.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.208000, 31949.400000, 1725.232050, 1725.232050, 0.000000, X, Y) && !ellipse(41869.218000, 32195.644000, 2132.416061, 2132.416061, 0.000000, X, Y) && !ellipse(19817.598740, 30401.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.876465, 29685.348328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31795.183289, 29098.119568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34662.983978, 29080.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.314026, 28585.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18041.242800, 27647.194400, 533.367215, 377.331211, 93.568461, X, Y) && !ellipse(18349.198944, 23595.929779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26414.676340, 21874.178400, 448.795213, 448.795213, 0.000000, X, Y) && !ellipse(18096.290146, 21783.253662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.996368, 21326.149216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14603.163681, 19602.553314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22583.670654, 19176.800781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21991.473007, 19262.789215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18157.095627, 18307.700836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28969.780762, 41082.127960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29649.907128, 37573.982556, 540.167247, 384.757541, -0.000000, X, Y) && !ellipse(29507.949890, 35394.017090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34505.246033, 33342.821106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31861.582916, 33172.660278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31351.182739, 32901.741089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.328156, 32655.590668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31337.963348, 32489.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33559.267059, 32315.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.109802, 31854.390442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.458000, 31861.710000, 1709.888049, 1709.888049, 0.000000, X, Y) && !ellipse(35444.696000, 30083.154000, 1678.392048, 1678.392048, 0.000000, X, Y) && !ellipse(22416.168220, 28787.999200, 435.206413, 326.030409, 131.726156, X, Y) && !ellipse(23200.643707, 23212.636475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.599182, 23055.976471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25576.584000, 20864.492000, 1326.016038, 1326.016038, 0.000000, X, Y) && !ellipse(34886.614441, 16026.670914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.198792, 14567.677887, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 06:59:23 2013] Writing fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1.gif
[Sat May 25 06:59:39 2013] Mean detx,y = (3978.99, -5434.21) 
[Sat May 25 06:59:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 07:08:37 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 07:08:37 2013] Setting source spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 25 07:08:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 25 10:55:43 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:43 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 68835.00
[Sat May 25 10:55:44 2013] Total counts from fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 30606.00
[Sat May 25 10:55:44 2013] Got source and background scale factors 49864980.000000, 222491625.000000
[Sat May 25 10:55:44 2013] User source parameters:
  Position = (379.3, 355.0) = 1 23 38.31 33 15 9.1
  Extent = 41.4 (41.0-82.9)" x 28.4 (26.8-29.8)", rotation angle = 20 (16-23) degrees
  Source aperture counts = 61975.6 +/- 263.4
  Background aperture counts = 6859.4
  Rate = 2 +/- 0.009

[Sat May 25 10:55:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:55:53 2013] Using photon index=1.80, rate=0.303, arf fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1.arf
[Sat May 25 10:55:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:55:53 2013] Updating source flux to 9.3e-13
[Sat May 25 10:56:26 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat May 25 10:56:26 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat May 25 10:56:35 2013] xmm0080540101/analysis//spectral/fullrun_pn_xmm0080540101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete