[Fri May 24 13:05:10 2013] Detection parameters:
  Position = (368.9, 378.7) = 1 23 41.91 33 16 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.3 +/- 18.2
  Background counts = 57.5
  Rate = 0.008 +/- 0.0009

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 7.74'
[Fri May 24 18:29:21 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Fri May 24 18:29:21 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.851
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.30"
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7.csv
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7.csv
[Fri May 24 21:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri May 24 21:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:33:03 2013] Spatial fit model total counts = 1041.610000, observed total counts = 903.000000
[Fri May 24 21:33:03 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:33:03 2013] Source is confused with source 10
[Fri May 24 21:33:03 2013] Source is confused with source 26
[Fri May 24 21:33:03 2013] Source is confused with source 28
[Sat May 25 04:02:46 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sat May 25 04:02:46 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.851
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.30"
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7.csv
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7.csv
[Sat May 25 06:58:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 25 06:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:09 2013] Spatial fit model total counts = 1043.840000, observed total counts = 903.000000
[Sat May 25 06:59:09 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 06:59:09 2013] Spatial fit model total counts = 947.321000, observed total counts = 949.000000
[Sat May 25 06:59:09 2013] Offset between fit and detection position for source 8 = 1.358407 pixels
[Sat May 25 06:59:09 2013] Warning, changing simple spatial fit ID from 7 to 11
[Sat May 25 06:59:09 2013] 887.749000 total counts/ 464.217000 bgd. counts: snr = 19.657383
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.358407 pixels
  Position = (370.2, 378.5) = 1 23 41.45 33 16 51.4
  Extent = 20.9 (20.8-20.9)", rotation angle = 0
  Source counts = 423.5 +/- 29.8
  Background counts = 464.2
  Rate = 0.01 +/- 0.0009
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 09:27:25 2013] XMMSAS src. selection expression = ellipse(32160.262320, 32884.758000, 1253.790036, 1253.790036, 0.000000, X, Y)
[Sat May 25 09:27:25 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_src.reg
[Sat May 25 09:27:25 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (298, 306) - (442, 451)
[Sat May 25 09:27:26 2013] XMMSAS bgd. selection expression = annulus(32160.262320, 32884.758000, 2089.650060, 4179.300120, X, Y) && !ellipse(32550.533920, 31084.699600, 705.735220, 593.080017, 39.944700, X, Y) && !ellipse(33609.686000, 30525.104000, 1113.728032, 1113.728032, 0.000000, X, Y) && !ellipse(32239.048431, 30057.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31062.766400, 30098.582800, 1467.800042, 661.548019, 98.938780, X, Y) && !ellipse(31045.618000, 30343.662000, 1512.064044, 1512.064044, 0.000000, X, Y) && !ellipse(31508.556000, 29589.622000, 1532.536044, 1532.536044, 0.000000, X, Y) && !ellipse(32199.674347, 33297.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.868000, 32140.599076, 1728.408050, 343.947210, 20.665600, X, Y) && !ellipse(32426.578461, 29111.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.818000, 32247.859200, 1593.168046, 1593.168046, 0.000000, X, Y) && !ellipse(34445.218475, 32034.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34845.262000, 29792.728000, 1668.736048, 1101.224032, 117.460200, X, Y) && !ellipse(34287.422119, 29631.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33586.986000, 32927.004000, 3577.728103, 3577.728103, 0.000000, X, Y) && !ellipse(30871.533112, 31437.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32952.790000, 33264.932200, 1702.280049, 612.325618, 196.442000, X, Y) && !ellipse(35432.350000, 28893.044000, 2769.960080, 2769.960080, 0.000000, X, Y) && !ellipse(33120.810211, 32543.420990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.405396, 33045.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34545.435211, 32515.381226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.672400, 31840.723600, 484.206414, 484.206414, 0.000000, X, Y) && !ellipse(35379.231232, 32606.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.540253, 29467.930634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34554.161600, 33984.802000, 1789.152051, 1789.152051, 0.000000, X, Y) && !ellipse(30729.346000, 28515.902000, 3065.072088, 3065.072088, 0.000000, X, Y) && !ellipse(30566.970000, 32535.606000, 1557.760045, 1557.760045, 0.000000, X, Y) && !ellipse(31449.777252, 33024.530884, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 09:27:26 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8.gif
[Sat May 25 09:29:12 2013] Mean detx,y = (-2454.21, 6915.22) 
[Sat May 25 09:29:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:30:03 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:30:03 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat May 25 09:30:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat May 25 10:56:02 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:02 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 2389.00
[Sat May 25 10:56:02 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1363.00
[Sat May 25 10:56:02 2013] Got source and background scale factors 4045421.000000, 9022998.000000
[Sat May 25 10:56:02 2013] User source parameters:
  Position = (370.2, 378.5) = 1 23 41.45 33 16 51.4
  Extent = 20.9 (20.8-20.9)", rotation angle = 0
  Source aperture counts = 1777.9 +/- 49.9
  Background aperture counts = 611.1
  Rate = 0.05 +/- 0.001

[Sat May 25 10:56:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:07 2013] Using photon index=1.80, rate=0.0123, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8.arf
[Sat May 25 10:56:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:07 2013] Updating source flux to 1.9e-13
[Sat May 25 10:56:15 2013] Flag p found in src. 8 procflags, skipping spectral fitting
[Sat May 25 10:56:15 2013] Flag c found in src. 8 procflags, skipping spectral fitting
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete