[Fri May 24 13:05:11 2013] Detection parameters:
  Position = (304.2, 250.8) = 1 24 4.36 33 7 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.4 +/- 14.9
  Background counts = 14.5
  Rate = 0.005 +/- 0.0006

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 3.48'
[Fri May 24 18:29:21 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Fri May 24 18:29:21 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.707
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.17"
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20.csv
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20.csv
[Fri May 24 21:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May 24 21:32:24 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri May 24 21:33:03 2013] Spatial fit model total counts = 266.230000, observed total counts = 257.000000
[Fri May 24 21:33:03 2013] Offset between fit and detection position for source 59 = 0.449162 pixels
[Fri May 24 21:33:03 2013] 260.292500 total counts/ 200.102000 bgd. counts: snr = 4.255026
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.449162 pixels
  Position = (304.1, 251.2) = 1 24 4.40 33 7 37.6
  Extent = 4.7 (3.0-6.3)", rotation angle = 0
  Source counts = 60.2 +/- 16.1
  Background counts = 200.1
  Rate = 0.002 +/- 0.0005
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 04:02:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 4.68"
[Sat May 25 04:02:46 2013] source mask rpix=1.1, npix_max = 9, mask sum = 7, frac = 0.704
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 4.68"
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19.csv
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19.csv
[Sat May 25 06:58:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May 25 06:58:35 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat May 25 06:59:09 2013] Spatial fit model total counts = 266.009000, observed total counts = 257.000000
[Sat May 25 06:59:09 2013] Offset between fit and detection position for source 59 = 0.006158 pixels
[Sat May 25 06:59:09 2013] 262.357500 total counts/ 202.439000 bgd. counts: snr = 4.211277
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.006158 pixels
  Position = (304.1, 251.2) = 1 24 4.40 33 7 37.6
  Extent = 4.7 (2.9-6.3)", rotation angle = 0
  Source counts = 59.9 +/- 16.2
  Background counts = 202.4
  Rate = 0.002 +/- 0.0005
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 09:27:26 2013] XMMSAS src. selection expression = ellipse(26406.183120, 21804.657600, 281.636408, 281.636408, 0.000000, X, Y)
[Sat May 25 09:27:26 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_src.reg
[Sat May 25 09:27:26 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (288, 235) - (320, 267)
[Sat May 25 09:27:26 2013] XMMSAS bgd. selection expression = annulus(26406.183120, 21804.657600, 469.394014, 938.788027, X, Y)
[Sat May 25 09:27:26 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59.gif
[Sat May 25 09:33:35 2013] Mean detx,y = (-652.52, -5310.90) 
[Sat May 25 09:33:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:33:43 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:33:44 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat May 25 09:33:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Sat May 25 10:29:03 2013] Not generating rmf since there are only 59 counts
[Sat May 25 10:29:03 2013] rmf not generated due to insufficient counts
[Sat May 25 10:56:04 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:04 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 82.00
[Sat May 25 10:56:04 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_bgd.pi.gz = 216.00
[Sat May 25 10:56:04 2013] Got source and background scale factors 210880.000000, 1971960.000000
[Sat May 25 10:56:04 2013] User source parameters:
  Position = (304.1, 251.2) = 1 24 4.40 33 7 37.6
  Extent = 4.7 (2.9-6.3)", rotation angle = 0
  Source aperture counts = 58.9 +/- 10.1
  Background aperture counts = 23.1
  Rate = 0.002 +/- 0.0003

[Sat May 25 10:56:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:08 2013] Using photon index=1.80, rate=0.00174, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59.arf
[Sat May 25 10:56:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:08 2013] Updating source flux to 3.3e-14
[Sat May 25 10:56:15 2013] Source 59 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete