[Fri May 24 13:05:11 2013] Detection parameters:
  Position = (356.5, 368.8) = 1 23 46.21 33 16 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 14.4
  Background counts = 58.9
  Rate = 0.002 +/- 0.0006

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 6.61'
[Fri May 24 18:29:21 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Fri May 24 18:29:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.000
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 9.74"
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src50.ximg exists
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri May 24 21:32:23 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src50 appears to have run properly
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri May 24 21:32:24 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Fri May 24 21:33:03 2013] Spatial fit model total counts = 994.612000, observed total counts = 937.000000
[Fri May 24 21:33:03 2013] Offset between fit and detection position for source 34 = 7.319985 pixels
[Fri May 24 21:33:03 2013] 977.040000 total counts/ 774.875000 bgd. counts: snr = 7.262567
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 7.319985 pixels
  Position = (351.9, 374.5) = 1 23 47.80 33 16 34.0
  Extent = 19.5 (19.4-38.9)", rotation angle = 0
  Source counts = 202.2 +/- 31.3
  Background counts = 774.9
  Rate = 0.006 +/- 0.0009
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:33:03 2013] Source is confused with source 40
[Sat May 25 04:02:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 19.47"
[Sat May 25 04:02:46 2013] source mask rpix=4.5, npix_max = 99, mask sum = 61, frac = 0.616
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 19.47"
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45.csv
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45_1.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45.csv
[Sat May 25 06:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:36 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sat May 25 06:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sat May 25 06:58:36 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sat May 25 06:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sat May 25 06:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:09 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 22.652056 pixels away
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 09:27:27 2013] XMMSAS src. selection expression = ellipse(30566.970000, 32535.606000, 1168.320034, 1168.320034, 0.000000, X, Y)
[Sat May 25 09:27:27 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_src.reg
[Sat May 25 09:27:27 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (285, 307) - (419, 442)
[Sat May 25 09:27:27 2013] XMMSAS bgd. selection expression = annulus(30566.970000, 32535.606000, 1947.200056, 3894.400112, X, Y) && !ellipse(32550.533920, 31084.699600, 705.735220, 593.080017, 39.944700, X, Y) && !ellipse(33609.686000, 30525.104000, 1113.728032, 1113.728032, 0.000000, X, Y) && !ellipse(32239.048431, 30057.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.262320, 32884.758000, 1671.720048, 1671.720048, 0.000000, X, Y) && !ellipse(31062.766400, 30098.582800, 1467.800042, 661.548019, 98.938780, X, Y) && !ellipse(31045.618000, 30343.662000, 1512.064044, 1512.064044, 0.000000, X, Y) && !ellipse(31508.556000, 29589.622000, 1532.536044, 1532.536044, 0.000000, X, Y) && !ellipse(32199.674347, 33297.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.868000, 32140.599076, 1728.408050, 343.947210, 20.665600, X, Y) && !ellipse(32426.578461, 29111.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.818000, 32247.859200, 1593.168046, 1593.168046, 0.000000, X, Y) && !ellipse(34445.218475, 32034.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34845.262000, 29792.728000, 1668.736048, 1101.224032, 117.460200, X, Y) && !ellipse(34287.422119, 29631.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33586.986000, 32927.004000, 3577.728103, 3577.728103, 0.000000, X, Y) && !ellipse(30871.533112, 31437.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32952.790000, 33264.932200, 1702.280049, 612.325618, 196.442000, X, Y) && !ellipse(35432.350000, 28893.044000, 2769.960080, 2769.960080, 0.000000, X, Y) && !ellipse(33120.810211, 32543.420990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.405396, 33045.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34545.435211, 32515.381226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.672400, 31840.723600, 484.206414, 484.206414, 0.000000, X, Y) && !ellipse(33859.540253, 29467.930634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34554.161600, 33984.802000, 1789.152051, 1789.152051, 0.000000, X, Y) && !ellipse(30729.346000, 28515.902000, 3065.072088, 3065.072088, 0.000000, X, Y) && !ellipse(31449.777252, 33024.530884, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 09:27:27 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34.gif
[Sat May 25 09:45:09 2013] Mean detx,y = (-1223.18, 5999.68) 
[Sat May 25 09:45:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:45:48 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:45:49 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat May 25 09:45:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat May 25 10:56:07 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:07 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1338.00
[Sat May 25 10:56:07 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 2109.00
[Sat May 25 10:56:07 2013] Got source and background scale factors 3367450.000000, 12765455.000000
[Sat May 25 10:56:07 2013] User source parameters:
  Position = (351.9, 374.5) = 1 23 47.80 33 16 34.0
  Extent = 19.5 (19.4-38.9)", rotation angle = 0
  Source aperture counts = 781.7 +/- 37.6
  Background aperture counts = 556.3
  Rate = 0.02 +/- 0.001

[Sat May 25 10:56:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:08 2013] Using photon index=1.80, rate=0.00588, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34.arf
[Sat May 25 10:56:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:08 2013] Updating source flux to 8.3e-14
[Sat May 25 10:56:15 2013] Flag c found in src. 34 procflags, skipping spectral fitting
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete