[Fri May 24 13:05:10 2013] Detection parameters:
  Position = (381.3, 374.6) = 1 23 37.62 33 16 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 14.5
  Background counts = 63.7
  Rate = 0.004 +/- 0.0007

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 8.16'
[Fri May 24 18:29:21 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Fri May 24 18:29:21 2013] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.853
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 10.51"
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31.csv
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31.csv
[Fri May 24 21:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri May 24 21:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri May 24 21:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri May 24 21:32:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:33:03 2013] Source 31 is offset by 1.630692 and 0.245529 pixels which is larger than
2 X fitted extent = 1.203218 x 1.203218, not incorporating fit results
[Fri May 24 21:33:03 2013] Warning, spatial fit 31 centroid is now closest to src. 33
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:33:03 2013] Source is confused with source 11
[Sat May 25 04:02:46 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Sat May 25 04:02:46 2013] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.853
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.51"
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29.csv
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat May 25 06:58:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29.csv
[Sat May 25 06:58:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat May 25 06:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat May 25 06:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:09 2013] Source 31 is offset by -5.102319 and 2.733414 pixels which is larger than
2 X fitted extent = 9.662345 x 1.209637, not incorporating fit results
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 09:27:26 2013] XMMSAS src. selection expression = ellipse(33120.810211, 32543.420990, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 09:27:26 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_src.reg
[Sat May 25 09:27:26 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (344, 337) - (419, 412)
[Sat May 25 09:27:26 2013] XMMSAS bgd. selection expression = annulus(33120.810211, 32543.420990, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.533920, 31084.699600, 705.735220, 593.080017, 39.944700, X, Y) && !ellipse(33609.686000, 30525.104000, 1113.728032, 1113.728032, 0.000000, X, Y) && !ellipse(32239.048431, 30057.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.262320, 32884.758000, 1671.720048, 1671.720048, 0.000000, X, Y) && !ellipse(31062.766400, 30098.582800, 1467.800042, 661.548019, 98.938780, X, Y) && !ellipse(31045.618000, 30343.662000, 1512.064044, 1512.064044, 0.000000, X, Y) && !ellipse(31508.556000, 29589.622000, 1532.536044, 1532.536044, 0.000000, X, Y) && !ellipse(32199.674347, 33297.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.868000, 32140.599076, 1728.408050, 343.947210, 20.665600, X, Y) && !ellipse(31271.818000, 32247.859200, 1593.168046, 1593.168046, 0.000000, X, Y) && !ellipse(34445.218475, 32034.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34845.262000, 29792.728000, 1668.736048, 1101.224032, 117.460200, X, Y) && !ellipse(34287.422119, 29631.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33586.986000, 32927.004000, 3577.728103, 3577.728103, 0.000000, X, Y) && !ellipse(30871.533112, 31437.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32952.790000, 33264.932200, 1702.280049, 612.325618, 196.442000, X, Y) && !ellipse(35432.350000, 28893.044000, 2769.960080, 2769.960080, 0.000000, X, Y) && !ellipse(32998.405396, 33045.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34545.435211, 32515.381226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35379.231232, 32606.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34554.161600, 33984.802000, 1789.152051, 1789.152051, 0.000000, X, Y) && !ellipse(30729.346000, 28515.902000, 3065.072088, 3065.072088, 0.000000, X, Y) && !ellipse(30566.970000, 32535.606000, 1557.760045, 1557.760045, 0.000000, X, Y) && !ellipse(31449.777252, 33024.530884, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 09:27:26 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31.gif
[Sat May 25 09:40:10 2013] Mean detx,y = (-3388.97, 7091.45) 
[Sat May 25 09:40:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:40:23 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:40:23 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May 25 09:40:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat May 25 10:42:28 2013] Not generating rmf since there are only 74 counts
[Sat May 25 10:42:28 2013] rmf not generated due to insufficient counts
[Sat May 25 10:56:05 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:05 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 664.00
[Sat May 25 10:56:05 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 0.00
[Sat May 25 10:56:05 2013] Got source and background scale factors 1041670.000000, 0.000000
[Sat May 25 10:56:05 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat May 25 10:56:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:08 2013] Using photon index=1.80, rate=0.00372, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31.arf
[Sat May 25 10:56:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:08 2013] Updating source flux to 6.3e-14
[Sat May 25 10:56:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete