[Fri May 24 13:05:10 2013] Detection parameters:
  Position = (211.1, 273.2) = 1 24 36.59 33 9 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.7 +/- 18.4
  Background counts = 11.3
  Rate = 0.01 +/- 0.0009

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 6.59'
[Fri May 24 18:29:21 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Fri May 24 18:29:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.136
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.72"
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4.csv
[Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 24 21:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4.csv
[Fri May 24 21:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 24 21:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:33:03 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.313164 pixels away
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 04:02:46 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Sat May 25 04:02:46 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.136
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.72"
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 25 06:58:34 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 25 06:58:35 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 25 06:59:09 2013] Spatial fit model total counts = 349.033000, observed total counts = 343.000000
[Sat May 25 06:59:09 2013] Offset between fit and detection position for source 3 = 0.152784 pixels
[Sat May 25 06:59:09 2013] 354.500000 total counts/ 198.746000 bgd. counts: snr = 11.048161
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.152784 pixels
  Position = (211.2, 273.3) = 1 24 36.58 33 9 13.7
  Extent = 6.7 (5.5-8.2)" x 3.8 (3.1-4.7)", rotation angle = 80 (63-93) degrees
  Source counts = 155.8 +/- 18.8
  Background counts = 198.7
  Rate = 0.005 +/- 0.0005
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sat May 25 09:27:25 2013] XMMSAS src. selection expression = ellipse(18323.490120, 23731.311000, 402.723012, 226.636807, 79.835406, X, Y)
[Sat May 25 09:27:25 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_src.reg
[Sat May 25 09:27:25 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (188, 250) - (234, 296)
[Sat May 25 09:27:25 2013] XMMSAS bgd. selection expression = annulus(18323.490120, 23731.311000, 671.205019, 1342.410039, X, Y)
[Sat May 25 09:27:25 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3.gif
[Sat May 25 09:28:13 2013] Mean detx,y = (7618.14, -6225.88) 
[Sat May 25 09:28:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:28:39 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:28:39 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 25 09:28:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 25 10:56:01 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:01 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 188.00
[Sat May 25 10:56:01 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 224.00
[Sat May 25 10:56:02 2013] Got source and background scale factors 275564.000000, 3368729.000000
[Sat May 25 10:56:02 2013] User source parameters:
  Position = (211.2, 273.3) = 1 24 36.58 33 9 13.7
  Extent = 6.7 (5.5-8.2)" x 3.8 (3.1-4.7)", rotation angle = 80 (63-93) degrees
  Source aperture counts = 169.7 +/- 14.7
  Background aperture counts = 18.3
  Rate = 0.005 +/- 0.0004

[Sat May 25 10:56:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:07 2013] Using photon index=1.80, rate=0.00453, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3.arf
[Sat May 25 10:56:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:07 2013] Updating source flux to 1.1e-13
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete