[Fri May 24 13:05:10 2013] Detection parameters:
  Position = (362.0, 380.1) = 1 23 44.28 33 16 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.8 +/- 13.3
  Background counts = 46.8
  Rate = 0.002 +/- 0.0004

[Fri May 24 13:05:11 2013] Off-axis axis estimate = 7.51'
[Fri May 24 18:29:21 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Fri May 24 18:29:21 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.743
[Fri May 24 18:29:21 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 10.18"
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57.csv
[Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri May 24 21:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57.csv
[Fri May 24 21:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri May 24 21:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri May 24 21:32:24 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri May 24 21:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri May 24 21:32:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:33:03 2013] Source 28 is offset by 6.205325 and 1.993619 pixels which is larger than
2 X fitted extent = 1.144520 x 1.144520, not incorporating fit results
[Fri May 24 21:33:03 2013] Warning, spatial fit 57 centroid is now closest to src. 33
[Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:33:03 2013] Assessing source extent using major
[Fri May 24 21:33:03 2013] Source does appear to be extended
[Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:33:03 2013] Source is confused with source 8
[Sat May 25 04:02:46 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Sat May 25 04:02:46 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.743
[Sat May 25 04:02:46 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 10.18"
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48.csv
[Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat May 25 06:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48.csv
[Sat May 25 06:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:58:36 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat May 25 06:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat May 25 06:58:36 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat May 25 06:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat May 25 06:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:09 2013] Warning, spatial fit 48 centroid is now closest to src. 10
[Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:09 2013] Assessing source extent using major
[Sat May 25 06:59:09 2013] Source does appear to be extended
[Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 09:27:27 2013] XMMSAS src. selection expression = ellipse(31449.777252, 33024.530884, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 09:27:27 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_src.reg
[Sat May 25 09:27:27 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (325, 343) - (400, 418)
[Sat May 25 09:27:27 2013] XMMSAS bgd. selection expression = annulus(31449.777252, 33024.530884, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.533920, 31084.699600, 705.735220, 593.080017, 39.944700, X, Y) && !ellipse(33609.686000, 30525.104000, 1113.728032, 1113.728032, 0.000000, X, Y) && !ellipse(32239.048431, 30057.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.262320, 32884.758000, 1671.720048, 1671.720048, 0.000000, X, Y) && !ellipse(31062.766400, 30098.582800, 1467.800042, 661.548019, 98.938780, X, Y) && !ellipse(31045.618000, 30343.662000, 1512.064044, 1512.064044, 0.000000, X, Y) && !ellipse(31508.556000, 29589.622000, 1532.536044, 1532.536044, 0.000000, X, Y) && !ellipse(32199.674347, 33297.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.868000, 32140.599076, 1728.408050, 343.947210, 20.665600, X, Y) && !ellipse(31271.818000, 32247.859200, 1593.168046, 1593.168046, 0.000000, X, Y) && !ellipse(34445.218475, 32034.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34845.262000, 29792.728000, 1668.736048, 1101.224032, 117.460200, X, Y) && !ellipse(33586.986000, 32927.004000, 3577.728103, 3577.728103, 0.000000, X, Y) && !ellipse(30871.533112, 31437.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32952.790000, 33264.932200, 1702.280049, 612.325618, 196.442000, X, Y) && !ellipse(35432.350000, 28893.044000, 2769.960080, 2769.960080, 0.000000, X, Y) && !ellipse(33120.810211, 32543.420990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.405396, 33045.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.672400, 31840.723600, 484.206414, 484.206414, 0.000000, X, Y) && !ellipse(34554.161600, 33984.802000, 1789.152051, 1789.152051, 0.000000, X, Y) && !ellipse(30729.346000, 28515.902000, 3065.072088, 3065.072088, 0.000000, X, Y) && !ellipse(30566.970000, 32535.606000, 1557.760045, 1557.760045, 0.000000, X, Y)
[Sat May 25 09:27:27 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28.gif
[Sat May 25 09:46:35 2013] Mean detx,y = (-1732.20, 7002.90) 
[Sat May 25 09:46:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 09:46:56 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 09:46:56 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat May 25 09:46:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat May 25 10:54:49 2013] Not generating rmf since there are only 60 counts
[Sat May 25 10:54:49 2013] rmf not generated due to insufficient counts
[Sat May 25 10:56:07 2013] Updating aperture counts using extracted products
[Sat May 25 10:56:07 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 465.00
[Sat May 25 10:56:07 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 81.00
[Sat May 25 10:56:07 2013] Got source and background scale factors 947112.000000, 454592.000000
[Sat May 25 10:56:07 2013] User source parameters:
  Position = (362.0, 380.1) = 1 23 44.28 33 16 52.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 296.2 +/- 22.6
  Background aperture counts = 168.8
  Rate = 0.009 +/- 0.0007

[Sat May 25 10:56:07 2013] Updating counts from extracted products
[Sat May 25 10:56:07 2013] Set source signif. to 296.24/12.99 = 22.80
[Sat May 25 10:56:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:08 2013] Using photon index=1.80, rate=0.00861, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28.arf
[Sat May 25 10:56:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:08 2013] Updating source flux to 1.5e-13
[Sat May 25 10:56:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete