[Fri May 24 13:05:10 2013] Detection parameters: Position = (385.3, 355.0) = 1 23 36.24 33 15 9.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 502.6 +/- 31.6 Background counts = 75.0 Rate = 0.02 +/- 0.001 [Fri May 24 13:05:11 2013] Off-axis axis estimate = 7.51' [Fri May 24 18:29:21 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting [Fri May 24 18:29:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 24 18:29:21 2013] Initial guess for spatial extent in simple fitting = 10.19" [Fri May 24 18:29:21 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115 [Fri May 24 18:29:21 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.19" [Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src2.ximg exists [Fri May 24 21:32:22 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src2_1.ximg exists [Fri May 24 21:32:22 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_src2 appears to have run properly [Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Fri May 24 21:32:23 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Fri May 24 21:32:23 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Fri May 24 21:33:03 2013] Source 1 is offset by 8.188625 and -2.697297 pixels which is larger than 2 X fitted extent = 1.569600 x 4.686069, not incorporating fit results [Fri May 24 21:33:03 2013] Spatial fit model total counts = 1615.690000, observed total counts = 1616.000000 [Fri May 24 21:33:03 2013] Offset between fit and detection position for source 1 = 3.930915 pixels [Fri May 24 21:33:03 2013] Warning, changing simple spatial fit ID from 2 to 22 [Fri May 24 21:33:03 2013] 1561.644000 total counts/ 1422.910000 bgd. counts: snr = 3.677852 Spatial fit parameters: Offset between fit and detection position for source 1 = 3.930915 pixels Position = (386.8, 351.4) = 1 23 35.69 33 14 53.3 Extent = 13.7 (8.8-20.5)", rotation angle = 0 Source counts = 138.7 +/- 39.5 Background counts = 1422.9 Rate = 0.004 +/- 0.001 [Fri May 24 21:33:03 2013] Vigneting correction estimate = 1.000000 [Fri May 24 21:33:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 21:33:03 2013] Assessing source extent using major axis lower bound [Fri May 24 21:33:03 2013] Source does appear to be extended [Fri May 24 21:33:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 25 04:02:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 25 04:02:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat May 25 04:02:46 2013] Initial guess for spatial extent in simple fitting = 13.69" [Sat May 25 04:02:46 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921 [Sat May 25 04:02:46 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.69" [Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src2.ximg exists [Sat May 25 06:58:34 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src2_1.ximg exists [Sat May 25 06:58:34 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_src2 appears to have run properly [Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat May 25 06:58:35 2013] fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat May 25 06:58:35 2013] Fit fullrun_mos2_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Sat May 25 06:59:09 2013] Source 1 is offset by 4.380966 and -0.114805 pixels which is larger than 2 X fitted extent = 0.933057 x 0.933057, not incorporating fit results [Sat May 25 06:59:09 2013] Warning, spatial fit 2 centroid is now closest to src. 36 [Sat May 25 06:59:09 2013] Spatial fit model total counts = 1617.960000, observed total counts = 1616.000000 [Sat May 25 06:59:09 2013] Offset between fit and detection position for source 1 = 0.030276 pixels [Sat May 25 06:59:09 2013] Warning, changing simple spatial fit ID from 2 to 21 [Sat May 25 06:59:09 2013] 1533.977000 total counts/ 1387.630000 bgd. counts: snr = 3.928683 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.030276 pixels Position = (386.9, 351.4) = 1 23 35.68 33 14 53.3 Extent = 13.9 (9.6-20.5)", rotation angle = 0 Source counts = 146.3 +/- 39.2 Background counts = 1387.6 Rate = 0.004 +/- 0.001 [Sat May 25 06:59:09 2013] Vigneting correction estimate = 1.000000 [Sat May 25 06:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 25 06:59:09 2013] Assessing source extent using major axis lower bound [Sat May 25 06:59:09 2013] Source does appear to be extended [Sat May 25 06:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 25 06:59:09 2013] Source is confused with source 29 [Sat May 25 09:27:25 2013] XMMSAS src. selection expression = ellipse(33609.686000, 30525.104000, 835.296024, 835.296024, 0.000000, X, Y) [Sat May 25 09:27:25 2013] Writing source region out to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_src.reg [Sat May 25 09:27:25 2013] Extracting stamp from image fullrun_mos2_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (339, 303) - (435, 399) [Sat May 25 09:27:25 2013] XMMSAS bgd. selection expression = annulus(33609.686000, 30525.104000, 1392.160040, 2784.320080, X, Y) && !ellipse(32550.533920, 31084.699600, 705.735220, 593.080017, 39.944700, X, Y) && !ellipse(32239.048431, 30057.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.262320, 32884.758000, 1671.720048, 1671.720048, 0.000000, X, Y) && !ellipse(31062.766400, 30098.582800, 1467.800042, 661.548019, 98.938780, X, Y) && !ellipse(31045.618000, 30343.662000, 1512.064044, 1512.064044, 0.000000, X, Y) && !ellipse(31508.556000, 29589.622000, 1532.536044, 1532.536044, 0.000000, X, Y) && !ellipse(32199.674347, 33297.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.868000, 32140.599076, 1728.408050, 343.947210, 20.665600, X, Y) && !ellipse(32426.578461, 29111.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.818000, 32247.859200, 1593.168046, 1593.168046, 0.000000, X, Y) && !ellipse(34445.218475, 32034.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34845.262000, 29792.728000, 1668.736048, 1101.224032, 117.460200, X, Y) && !ellipse(34287.422119, 29631.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33586.986000, 32927.004000, 3577.728103, 3577.728103, 0.000000, X, Y) && !ellipse(30871.533112, 31437.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32952.790000, 33264.932200, 1702.280049, 612.325618, 196.442000, X, Y) && !ellipse(35432.350000, 28893.044000, 2769.960080, 2769.960080, 0.000000, X, Y) && !ellipse(33120.810211, 32543.420990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.405396, 33045.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34545.435211, 32515.381226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35379.231232, 32606.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.540253, 29467.930634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34554.161600, 33984.802000, 1789.152051, 1789.152051, 0.000000, X, Y) && !ellipse(30729.346000, 28515.902000, 3065.072088, 3065.072088, 0.000000, X, Y) && !ellipse(35540.034600, 27400.726400, 1101.272032, 434.521613, 0.282907, X, Y) && !ellipse(30566.970000, 32535.606000, 1557.760045, 1557.760045, 0.000000, X, Y) && !ellipse(31449.777252, 33024.530884, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 25 09:27:25 2013] Writing fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1.gif [Sat May 25 09:27:44 2013] Mean detx,y = (-4445.72, 5306.23) [Sat May 25 09:27:45 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 25 09:27:57 2013] Binned source spectrum to 10 counts/bin [Sat May 25 09:27:57 2013] Setting source spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat May 25 09:27:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat May 25 10:56:01 2013] Updating aperture counts using extracted products [Sat May 25 10:56:01 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3465.00 [Sat May 25 10:56:01 2013] Total counts from fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00 [Sat May 25 10:56:01 2013] Got source and background scale factors 2146504.000000, 0.000000 [Sat May 25 10:56:01 2013] Background scale factor is not positive, halting re-assessment of this source [Sat May 25 10:56:07 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 25 10:56:07 2013] Using photon index=1.80, rate=0.00425, arf fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1.arf [Sat May 25 10:56:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 25 10:56:07 2013] Updating source flux to 6.1e-14 [Sat May 25 10:56:15 2013] Flag b found in src. 1 procflags, skipping spectral fitting [Sat May 25 10:56:15 2013] Flag c found in src. 1 procflags, skipping spectral fitting [Sat May 25 10:56:26 2013] xmm0080540101/analysis//spectral/fullrun_mos2_xmm0080540101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete