[Fri May 24 13:04:34 2013] Detection parameters:
  Position = (361.7, 337.4) = 1 23 44.40 33 13 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.0 +/- 19.8
  Background counts = 66.3
  Rate = 0.007 +/- 0.0007

[Fri May 24 13:04:34 2013] Off-axis axis estimate = 5.39'
[Fri May 24 16:14:29 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:14:29 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Fri May 24 16:14:29 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.889
[Fri May 24 16:14:29 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.12"
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13.csv
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13.csv
[Fri May 24 18:29:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 24 18:29:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:50 2013] Spatial fit model total counts = 1535.870000, observed total counts = 1363.000000
[Fri May 24 21:32:50 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:50 2013] Spatial fit model total counts = 1460.130000, observed total counts = 1354.000000
[Fri May 24 21:32:50 2013] Offset between fit and detection position for source 38 = 2.921711 pixels
[Fri May 24 21:32:50 2013] Warning, changing simple spatial fit ID from 13 to 19
[Fri May 24 21:32:50 2013] 1511.352000 total counts/ 1384.050000 bgd. counts: snr = 3.421837
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.921711 pixels
  Position = (363.7, 335.3) = 1 23 43.72 33 13 43.1
  Extent = 18.5 (13.6-36.9)" x 8.0 (3.5-13.4)", rotation angle = 24 (3-46) degrees
  Source counts = 127.3 +/- 38.9
  Background counts = 1384.0
  Rate = 0.004 +/- 0.001
[Fri May 24 21:32:50 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:50 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:32:50 2013] Source does appear to be extended
[Fri May 24 21:32:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Fri May 24 21:32:50 2013] Source is confused with source 39
[Fri May 24 21:32:50 2013] Source is confused with source 37
[Sat May 25 00:53:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:53:42 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Sat May 25 00:53:42 2013] source mask rpix=3.0, npix_max = 50, mask sum = 47, frac = 0.935
[Sat May 25 00:53:42 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.25"
[Sat May 25 04:02:44 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 25 04:02:44 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 25 04:02:44 2013] Fit fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src13 appears to have run properly
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat May 25 04:02:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:00 2013] Spatial fit model total counts = 1730.780000, observed total counts = 1593.000000
[Sat May 25 06:59:00 2013] Offset between fit and detection position for source 38 = 0.337295 pixels
[Sat May 25 06:59:00 2013] 1762.852000 total counts/ 1629.010000 bgd. counts: snr = 3.316122
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.337295 pixels
  Position = (363.9, 335.5) = 1 23 43.66 33 13 44.4
  Extent = 23.5 (17.7-26.5)" x 6.8 (3.5-12.4)", rotation angle = 22 (6-45) degrees
  Source counts = 133.8 +/- 42.0
  Background counts = 1629.0
  Rate = 0.004 +/- 0.001
[Sat May 25 06:59:00 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:00 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:00 2013] Source does appear to be extended
[Sat May 25 06:59:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Sat May 25 08:43:16 2013] XMMSAS src. selection expression = ellipse(31608.337600, 29143.881800, 1411.440041, 410.925612, 21.830500, X, Y)
[Sat May 25 08:43:16 2013] Writing source region out to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_src.reg
[Sat May 25 08:43:16 2013] Extracting stamp from image fullrun_mos1_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (283, 254) - (445, 417)
[Sat May 25 08:43:17 2013] XMMSAS bgd. selection expression = annulus(31608.337600, 29143.881800, 2352.400068, 4704.800135, X, Y) && !ellipse(33388.928345, 30578.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.283800, 30217.802800, 1576.624045, 231.461607, 149.577800, X, Y) && !ellipse(32392.769318, 32835.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31805.941467, 30406.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30115.269257, 25620.270142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.163391, 31263.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33042.470917, 32588.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33752.680634, 32012.184143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31856.790588, 29083.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32546.798187, 28922.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.842529, 31521.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.690000, 32399.882000, 1679.448048, 1030.000030, 214.227000, X, Y) && !ellipse(34511.374000, 32007.120000, 3342.752096, 1998.160057, 309.126000, X, Y) && !ellipse(34914.614380, 29708.736481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30601.436981, 30657.219147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31124.809631, 32221.947388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35660.966000, 30509.461800, 1703.168049, 1703.168049, 0.000000, X, Y) && !ellipse(31578.816986, 33017.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33947.541199, 32850.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34784.061279, 29232.294128, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38.gif
[Sat May 25 08:46:12 2013] Mean detx,y = (3619.02, 3037.61) 
[Sat May 25 08:46:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 08:46:49 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 08:46:49 2013] Setting source spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 25 08:46:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 25 10:55:56 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:56 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 1239.00
[Sat May 25 10:55:56 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 6873.00
[Sat May 25 10:55:56 2013] Got source and background scale factors 1619200.000000, 30532031.000000
[Sat May 25 10:55:56 2013] User source parameters:
  Position = (363.9, 335.5) = 1 23 43.66 33 13 44.4
  Extent = 23.5 (17.7-26.5)" x 6.8 (3.5-12.4)", rotation angle = 22 (6-45) degrees
  Source aperture counts = 874.5 +/- 36.2
  Background aperture counts = 364.5
  Rate = 0.03 +/- 0.001

[Sat May 25 10:56:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:01 2013] Using photon index=1.80, rate=0.00389, arf fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38.arf
[Sat May 25 10:56:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:01 2013] Updating source flux to 4.7e-14
[Sat May 25 10:56:10 2013] Flag p found in src. 38 procflags, skipping spectral fitting
[Sat May 25 10:56:10 2013] Flag c found in src. 38 procflags, skipping spectral fitting
[Sat May 25 10:56:15 2013] xmm0080540101/analysis//spectral/fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete