[Fri May 24 13:04:34 2013] Detection parameters:
  Position = (374.7, 333.0) = 1 23 39.92 33 13 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.5 +/- 15.8
  Background counts = 69.7
  Rate = 0.004 +/- 0.0006

[Fri May 24 13:04:34 2013] Off-axis axis estimate = 6.07'
[Fri May 24 16:14:29 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:14:29 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Fri May 24 16:14:29 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.943
[Fri May 24 16:14:29 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.46"
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21.csv
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21.csv
[Fri May 24 18:29:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 24 18:29:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:50 2013] Spatial fit model total counts = 1312.810000, observed total counts = 1164.000000
[Fri May 24 21:32:50 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:32:50 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:50 2013] Assessing source extent using major
[Fri May 24 21:32:50 2013] Source does appear to be extended
[Fri May 24 21:32:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:50 2013] Source is confused with source 38
[Sat May 25 00:53:42 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:53:43 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Sat May 25 00:53:43 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.943
[Sat May 25 00:53:43 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.46"
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20.csv
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20.csv
[Sat May 25 04:02:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat May 25 04:02:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:00 2013] Spatial fit model total counts = 1327.450000, observed total counts = 1164.000000
[Sat May 25 06:59:00 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 06:59:00 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:00 2013] Assessing source extent using major
[Sat May 25 06:59:00 2013] Source does appear to be extended
[Sat May 25 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 08:43:17 2013] XMMSAS src. selection expression = ellipse(32546.798187, 28922.186707, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing source region out to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_src.reg
[Sat May 25 08:43:17 2013] Extracting stamp from image fullrun_mos1_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (337, 295) - (412, 370)
[Sat May 25 08:43:17 2013] XMMSAS bgd. selection expression = annulus(32546.798187, 28922.186707, 1087.500000, 2175.000000, X, Y) && !ellipse(33388.928345, 30578.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.283800, 30217.802800, 1576.624045, 231.461607, 149.577800, X, Y) && !ellipse(31805.941467, 30406.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.163391, 31263.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31608.337600, 29143.881800, 1881.920054, 547.900816, 21.830500, X, Y) && !ellipse(31856.790588, 29083.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.842529, 31521.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.690000, 32399.882000, 1679.448048, 1030.000030, 214.227000, X, Y) && !ellipse(34511.374000, 32007.120000, 3342.752096, 1998.160057, 309.126000, X, Y) && !ellipse(34914.614380, 29708.736481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30601.436981, 30657.219147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35660.966000, 30509.461800, 1703.168049, 1703.168049, 0.000000, X, Y) && !ellipse(34784.061279, 29232.294128, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37.gif
[Sat May 25 08:48:01 2013] Mean detx,y = (3669.76, 3825.10) 
[Sat May 25 08:48:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 08:48:11 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 08:48:11 2013] Setting source spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat May 25 08:48:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat May 25 09:13:47 2013] Not generating rmf since there are only 98 counts
[Sat May 25 09:13:47 2013] rmf not generated due to insufficient counts
[Sat May 25 10:55:57 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:57 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 813.00
[Sat May 25 10:55:57 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1922.00
[Sat May 25 10:55:57 2013] Got source and background scale factors 1159596.000000, 4791388.000000
[Sat May 25 10:55:57 2013] User source parameters:
  Position = (374.7, 333.0) = 1 23 39.92 33 13 40.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 347.8 +/- 29.5
  Background aperture counts = 465.2
  Rate = 0.01 +/- 0.0009

[Sat May 25 10:55:57 2013] Updating counts from extracted products
[Sat May 25 10:55:57 2013] Set source signif. to 347.84/21.57 = 16.13
[Sat May 25 10:56:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:01 2013] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37.arf
[Sat May 25 10:56:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:01 2013] Updating source flux to 1.3e-13
[Sat May 25 10:56:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 10:56:15 2013] xmm0080540101/analysis//spectral/fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete