[Fri May 24 13:04:34 2013] Detection parameters:
  Position = (401.9, 342.0) = 1 23 30.48 33 14 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.4 +/- 16.2
  Background counts = 68.5
  Rate = 0.003 +/- 0.0006

[Fri May 24 13:04:34 2013] Off-axis axis estimate = 8.14'
[Fri May 24 16:14:29 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:14:29 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Fri May 24 16:14:29 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Fri May 24 16:14:29 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.50"
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29.csv
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May 24 18:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29.csv
[Fri May 24 18:29:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May 24 18:29:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 24 18:29:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:50 2013] Warning, spatial fit 29 centroid is now closest to src. 32
[Fri May 24 21:32:50 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:50 2013] Assessing source extent using major
[Fri May 24 21:32:50 2013] Source does appear to be extended
[Fri May 24 21:32:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:50 2013] Source is confused with source 32
[Fri May 24 21:32:50 2013] Source is confused with source 36
[Sat May 25 00:53:44 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:53:44 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sat May 25 00:53:44 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Sat May 25 00:53:44 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.50"
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27.csv
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27.csv
[Sat May 25 04:02:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat May 25 04:02:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:00 2013] Warning, spatial fit 27 centroid is now closest to src. 32
[Sat May 25 06:59:00 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 28.792815 pixels away
[Sat May 25 06:59:00 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:00 2013] Assessing source extent using major
[Sat May 25 06:59:00 2013] Source does appear to be extended
[Sat May 25 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 08:43:17 2013] XMMSAS src. selection expression = ellipse(34914.614380, 29708.736481, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing source region out to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_src.reg
[Sat May 25 08:43:17 2013] Extracting stamp from image fullrun_mos1_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (364, 305) - (439, 380)
[Sat May 25 08:43:17 2013] XMMSAS bgd. selection expression = annulus(34914.614380, 29708.736481, 1087.500000, 2175.000000, X, Y) && !ellipse(33388.928345, 30578.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.283800, 30217.802800, 1576.624045, 231.461607, 149.577800, X, Y) && !ellipse(33042.470917, 32588.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31608.337600, 29143.881800, 1881.920054, 547.900816, 21.830500, X, Y) && !ellipse(33752.680634, 32012.184143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32546.798187, 28922.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.690000, 32399.882000, 1679.448048, 1030.000030, 214.227000, X, Y) && !ellipse(34511.374000, 32007.120000, 3342.752096, 1998.160057, 309.126000, X, Y) && !ellipse(35660.966000, 30509.461800, 1703.168049, 1703.168049, 0.000000, X, Y) && !ellipse(34784.061279, 29232.294128, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34.gif
[Sat May 25 08:51:54 2013] Mean detx,y = (5128.57, 5729.40) 
[Sat May 25 08:51:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 08:52:13 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 08:52:13 2013] Setting source spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat May 25 08:52:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat May 25 09:21:50 2013] Not generating rmf since there are only 80 counts
[Sat May 25 09:21:50 2013] rmf not generated due to insufficient counts
[Sat May 25 10:55:58 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:58 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 762.00
[Sat May 25 10:55:58 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 986.00
[Sat May 25 10:55:58 2013] Got source and background scale factors 1166896.000000, 3045919.000000
[Sat May 25 10:55:58 2013] User source parameters:
  Position = (401.9, 342.0) = 1 23 30.48 33 14 14.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 384.3 +/- 28.6
  Background aperture counts = 377.7
  Rate = 0.01 +/- 0.0008

[Sat May 25 10:55:58 2013] Updating counts from extracted products
[Sat May 25 10:55:58 2013] Set source signif. to 384.26/19.44 = 19.77
[Sat May 25 10:56:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:01 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34.arf
[Sat May 25 10:56:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:01 2013] Updating source flux to 1.6e-13
[Sat May 25 10:56:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 10:56:15 2013] xmm0080540101/analysis//spectral/fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete