[Fri May 24 13:04:34 2013] Detection parameters:
  Position = (404.2, 350.7) = 1 23 29.66 33 14 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.0 +/- 15.4
  Background counts = 66.7
  Rate = 0.003 +/- 0.0006

[Fri May 24 13:04:34 2013] Off-axis axis estimate = 8.55'
[Fri May 24 16:14:29 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:14:29 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Fri May 24 16:14:29 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Fri May 24 16:14:29 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.71"
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src32.ximg exists
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri May 24 18:29:19 2013] Fit fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src32 appears to have run properly
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri May 24 18:29:20 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri May 24 18:29:20 2013] Fit fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Fri May 24 21:32:50 2013] Source 32 is offset by -7.416882 and -1.986706 pixels which is larger than
2 X fitted extent = 1.206630 x 1.206630, not incorporating fit results
[Fri May 24 21:32:50 2013] Spatial fit model total counts = 1080.620000, observed total counts = 987.000000
[Fri May 24 21:32:50 2013] Offset between fit and detection position for source 32 = 6.243951 pixels
[Fri May 24 21:32:50 2013] 1003.547000 total counts/ 739.641000 bgd. counts: snr = 9.703732
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 6.243951 pixels
  Position = (410.5, 351.2) = 1 23 27.51 33 14 52.4
  Extent = 21.3 (21.0-21.4)", rotation angle = 0
  Source counts = 263.9 +/- 31.7
  Background counts = 739.6
  Rate = 0.008 +/- 0.0009
[Fri May 24 21:32:50 2013] Source 32 is offset by 0.914529 and 4.701837 pixels which is larger than
2 X fitted extent = 1.192391 x 1.192391, not incorporating fit results
[Fri May 24 21:32:50 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:50 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:32:50 2013] Source does appear to be extended
[Fri May 24 21:32:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:50 2013] Source is confused with source 34
[Sat May 25 00:53:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:53:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:53:44 2013] Initial guess for spatial extent in simple fitting = 21.29"
[Sat May 25 00:53:44 2013] source mask rpix=4.9, npix_max = 116, mask sum = 71, frac = 0.610
[Sat May 25 00:53:44 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 21.29"
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30.csv
[Sat May 25 04:02:45 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat May 25 04:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30.csv
[Sat May 25 04:02:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat May 25 04:02:46 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat May 25 04:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat May 25 04:02:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:59:00 2013] Source 32 is offset by -1.199425 and -1.412117 pixels which is larger than
2 X fitted extent = 1.206630 x 1.206630, not incorporating fit results
[Sat May 25 06:59:00 2013] Warning, spatial fit 30 centroid is now closest to src. 34
[Sat May 25 06:59:00 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:59:00 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:59:00 2013] Source does appear to be extended
[Sat May 25 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 08:43:17 2013] XMMSAS src. selection expression = ellipse(35660.966000, 30509.461800, 1277.376037, 1277.376037, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing source region out to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_src.reg
[Sat May 25 08:43:17 2013] Extracting stamp from image fullrun_mos1_xmm0080540101_pi300-10000_cl_sm2.00.img.gz, (337, 278) - (484, 425)
[Sat May 25 08:43:17 2013] XMMSAS bgd. selection expression = annulus(35660.966000, 30509.461800, 2128.960061, 4257.920123, X, Y) && !ellipse(33388.928345, 30578.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39705.951935, 25782.277374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.283800, 30217.802800, 1576.624045, 231.461607, 149.577800, X, Y) && !ellipse(32392.769318, 32835.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31805.941467, 30406.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.163391, 31263.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33042.470917, 32588.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31608.337600, 29143.881800, 1881.920054, 547.900816, 21.830500, X, Y) && !ellipse(33752.680634, 32012.184143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31856.790588, 29083.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32546.798187, 28922.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.842529, 31521.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.690000, 32399.882000, 1679.448048, 1030.000030, 214.227000, X, Y) && !ellipse(34511.374000, 32007.120000, 3342.752096, 1998.160057, 309.126000, X, Y) && !ellipse(34914.614380, 29708.736481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30601.436981, 30657.219147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31124.809631, 32221.947388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31578.816986, 33017.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33947.541199, 32850.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34784.061279, 29232.294128, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 08:43:17 2013] Writing fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32.gif
[Sat May 25 08:52:53 2013] Mean detx,y = (5997.12, 6080.42) 
[Sat May 25 08:52:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 08:53:25 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 08:53:25 2013] Setting source spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat May 25 08:53:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat May 25 10:55:58 2013] Updating aperture counts using extracted products
[Sat May 25 10:55:58 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 1804.00
[Sat May 25 10:55:58 2013] Total counts from fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 4929.00
[Sat May 25 10:55:58 2013] Got source and background scale factors 4271278.000000, 25715657.000000
[Sat May 25 10:55:58 2013] User source parameters:
  Position = (410.5, 351.2) = 1 23 27.51 33 14 52.4
  Extent = 21.3 (21.0-21.4)", rotation angle = 0
  Source aperture counts = 985.3 +/- 43.5
  Background aperture counts = 818.7
  Rate = 0.03 +/- 0.001

[Sat May 25 10:56:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 10:56:01 2013] Using photon index=1.80, rate=0.00767, arf fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32.arf
[Sat May 25 10:56:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 10:56:01 2013] Updating source flux to 2.3e-13
[Sat May 25 10:56:10 2013] Flag b found in src. 32 procflags, skipping spectral fitting
[Sat May 25 10:56:10 2013] Flag c found in src. 32 procflags, skipping spectral fitting
[Sat May 25 10:56:15 2013] xmm0080540101/analysis//spectral/fullrun_mos1_xmm0080540101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete