[Fri May 24 13:04:33 2013] Detection parameters:
  Position = (458.1, 417.9) = 1 23 10.92 33 19 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.5 +/- 8.7
  Background counts = 14.1
  Rate = 0.001 +/- 0.0003

[Fri May 24 13:04:34 2013] Off-axis axis estimate = 14.46'
[Fri May 24 16:14:29 2013] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:14:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 16:14:29 2013] Initial guess for spatial extent in simple fitting = 13.66"
[Fri May 24 16:14:29 2013] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.038
[Fri May 24 16:14:29 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 13.66"
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54.ximg exists
[Fri May 24 18:29:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54.csv
[Fri May 24 18:29:19 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri May 24 18:29:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54.csv
[Fri May 24 18:29:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 18:29:21 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri May 24 18:29:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri May 24 18:29:21 2013] fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri May 24 18:29:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri May 24 18:29:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0080540101_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:32:50 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 16.619301 pixels away
[Fri May 24 21:32:50 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:32:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:32:50 2013] Assessing source extent using major
[Fri May 24 21:32:50 2013] Source does appear to be extended
[Fri May 24 21:32:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:32:50 2013] Deleting source due to low Poisson probability 0.9