[Fri May 24 00:55:06 2013] Detection parameters:
  Position = (321.0, 300.2) = 23 15 18.98 -59 10 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 640.9 +/- 30.9
  Background counts = 17.3
  Rate = 0.04 +/- 0.002

[Fri May 24 00:55:06 2013] Off-axis axis estimate = 1.64'
[Fri May 24 01:19:16 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri May 24 01:19:16 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Fri May 24 01:19:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri May 24 01:19:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri May 24 01:33:30 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 24 01:33:30 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 24 01:33:30 2013] Fit fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 24 01:33:30 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 24 01:33:30 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 24 01:33:30 2013] Fit fullrun_mos2_xmm0079940101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 24 01:33:39 2013] Spatial fit model total counts = 689.336000, observed total counts = 669.000000
[Fri May 24 01:33:39 2013] Offset between fit and detection position for source 1 = 0.235395 pixels
[Fri May 24 01:33:39 2013] 687.932000 total counts/ 236.310000 bgd. counts: snr = 29.378799
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.235395 pixels
  Position = (320.8, 300.3) = 23 15 19.08 -59 10 29.5
  Extent = 6.0 (5.4-6.8)" x 4.9 (4.3-5.5)", rotation angle = 46 (25-70) degrees
  Source counts = 451.6 +/- 26.2
  Background counts = 236.3
  Rate = 0.02 +/- 0.001
[Fri May 24 01:33:39 2013] Vigneting correction estimate = 1.000000
[Fri May 24 01:33:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 01:33:39 2013] Assessing source extent using major axis lower bound
[Fri May 24 01:33:39 2013] Source does appear to be extended
[Fri May 24 01:33:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri May 24 01:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 01:53:05 2013] Initial guess for spatial extent in simple fitting = 5.47"
[Fri May 24 01:53:05 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.972
[Fri May 24 01:53:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Fri May 24 02:07:01 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 24 02:07:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1.csv
[Fri May 24 02:07:01 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 24 02:07:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1.csv
[Fri May 24 02:07:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:07:01 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 24 02:07:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 02:07:01 2013] fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 24 02:07:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 02:07:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079940101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:07:10 2013] Warning, spatial fit 1 centroid is now closest to src. 5
[Fri May 24 02:07:10 2013] Vigneting correction estimate = 1.000000
[Fri May 24 02:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 02:07:10 2013] Assessing source extent using major axis lower bound
[Fri May 24 02:07:10 2013] Source does appear to be extended
[Fri May 24 02:07:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri May 24 02:33:01 2013] XMMSAS src. selection expression = ellipse(27862.604060, 26079.527200, 362.416810, 293.681408, 46.365317, X, Y)
[Fri May 24 02:33:01 2013] Writing source region out to fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 24 02:33:01 2013] Extracting stamp from image fullrun_mos2_xmm0079940101_pi300-10000_cl_sm2.00.img.gz, (300, 279) - (342, 321)
[Fri May 24 02:33:01 2013] XMMSAS bgd. selection expression = annulus(27862.604060, 26079.527200, 604.028017, 1208.056035, X, Y)
[Fri May 24 02:33:01 2013] Writing fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1.gif
[Fri May 24 02:33:06 2013] Mean detx,y = (101.17, -10.14) 
[Fri May 24 02:33:08 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 02:33:31 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 02:33:31 2013] Setting source spectrum file to fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 24 02:33:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 24 02:46:23 2013] Updating aperture counts using extracted products
[Fri May 24 02:46:23 2013] Total counts from fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 481.00
[Fri May 24 02:46:23 2013] Total counts from fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 234.00
[Fri May 24 02:46:23 2013] Got source and background scale factors 334400.000000, 2853918.000000
[Fri May 24 02:46:23 2013] User source parameters:
  Position = (320.8, 300.3) = 23 15 19.08 -59 10 29.5
  Extent = 6.0 (5.4-6.8)" x 4.9 (4.3-5.5)", rotation angle = 46 (25-70) degrees
  Source aperture counts = 453.6 +/- 22.9
  Background aperture counts = 27.4
  Rate = 0.02 +/- 0.001

[Fri May 24 02:46:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 02:46:25 2013] Using photon index=1.80, rate=0.0242, arf fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1.arf
[Fri May 24 02:46:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 02:46:25 2013] Updating source flux to 3.2e-13
[Fri May 24 02:46:31 2013] xmm0079940101/analysis//spectral/fullrun_mos2_xmm0079940101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete