[Tue May 28 21:03:03 2013] Detection parameters:
  Position = (271.6, 263.2) = 6 53 36.43 -23 43 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.9 +/- 16.1
  Background counts = 101.5
  Rate = 0.004 +/- 0.0005

[Tue May 28 21:03:04 2013] Off-axis axis estimate = 3.21'
[Tue May 28 21:03:20 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:20 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Tue May 28 21:03:20 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue May 28 21:03:20 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.04"
[Tue May 28 21:03:21 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19.ximg exists
[Tue May 28 21:03:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19.csv
[Tue May 28 21:03:21 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May 28 21:03:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19.csv
[Tue May 28 21:03:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:21 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May 28 21:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue May 28 21:03:21 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May 28 21:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue May 28 21:03:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:29 2013] Source 19 is offset by 4.138354 and -8.575667 pixels which is larger than
2 X fitted extent = 1.022331 x 1.022331, not incorporating fit results
[Tue May 28 21:03:29 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:29 2013] Assessing source extent using major
[Tue May 28 21:03:29 2013] Source does appear to be extended
[Tue May 28 21:03:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:03:42 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:42 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Tue May 28 21:03:42 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue May 28 21:03:42 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 8.04"
[Tue May 28 21:03:43 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18.ximg exists
[Tue May 28 21:03:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18.csv
[Tue May 28 21:03:43 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue May 28 21:03:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18.csv
[Tue May 28 21:03:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:43 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue May 28 21:03:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue May 28 21:03:43 2013] fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue May 28 21:03:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue May 28 21:03:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:51 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.326529 pixels away
[Tue May 28 21:03:51 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:51 2013] Assessing source extent using major
[Tue May 28 21:03:51 2013] Source does appear to be extended
[Tue May 28 21:03:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:04:04 2013] XMMSAS src. selection expression = ellipse(23579.558868, 22847.938995, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 21:04:04 2013] Not overwriting source region fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src.reg
[Tue May 28 21:04:04 2013] Extracting stamp from image fullrun_pn_xmm0079570201_pi300-10000_cl_sm2.00.img.gz, (234, 226) - (309, 301)
[Tue May 28 21:04:04 2013] XMMSAS bgd. selection expression = annulus(23579.558868, 22847.938995, 1087.500000, 2175.000000, X, Y) && !ellipse(21399.521800, 20747.740800, 524.785396, 524.785396, 0.000000, X, Y)
[Tue May 28 21:04:04 2013] Writing fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19.gif
[Tue May 28 21:04:05 2013] ../../xmm0079570201/products/events/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0079570201/products/events/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue May 28 21:04:05 2013] Mean detx,y = (2068.35, -725.50) 
[Tue May 28 21:04:05 2013] ../../xmm0079570201/products/images/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src.img and ../../xmm0079570201/products/images/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue May 28 21:04:05 2013] ../../xmm0079570201/products/spectra/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0079570201/products/spectra/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue May 28 21:04:05 2013] Setting source spectrum file to fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue May 28 21:04:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue May 28 21:04:05 2013] ../../xmm0079570201/products/lightcurves/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0079570201/products/lightcurves/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue May 28 21:04:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 21:04:08 2013] rmf not generated due to insufficient counts
[Tue May 28 21:04:08 2013] fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Tue May 28 21:10:46 2013] Updating aperture counts using extracted products
[Tue May 28 21:10:46 2013] Total counts from fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 231.00
[Tue May 28 21:10:46 2013] Total counts from fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1403.00
[Tue May 28 21:10:46 2013] Got source and background scale factors 1071632.000000, 9164478.000000
[Tue May 28 21:10:46 2013] User source parameters:
  Position = (271.6, 263.2) = 6 53 36.43 -23 43 58.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.9 +/- 16.2
  Background aperture counts = 164.1
  Rate = 0.004 +/- 0.0009

[Tue May 28 21:10:46 2013] Updating counts from extracted products
[Tue May 28 21:10:46 2013] Set source signif. to 66.94/12.81 = 5.23
[Tue May 28 21:10:48 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 21:10:48 2013] Using photon index=1.80, rate=0.00355, arf fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19.arf
[Tue May 28 21:10:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 21:10:48 2013] Updating source flux to 1.4e-14
[Tue May 28 21:10:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 21:11:01 2013] xmm0079570201/analysis//spectral/fullrun_pn_xmm0079570201_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete