[Tue May 28 21:03:05 2013] Detection parameters:
  Position = (124.2, 186.7) = 6 54 23.18 -23 49 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.4 +/- 16.8
  Background counts = 63.7
  Rate = 0.002 +/- 0.0004

[Tue May 28 21:03:05 2013] Off-axis axis estimate = 15.01'
[Tue May 28 21:03:22 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 21:03:22 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Tue May 28 21:03:22 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.021
[Tue May 28 21:03:22 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.93"
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 28 21:03:23 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 28 21:03:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:34 2013] Source 16 is offset by -5.084748 and -5.112381 pixels which is larger than
2 X fitted extent = 1.592009 x 1.592009, not incorporating fit results
[Tue May 28 21:03:34 2013] Warning, spatial fit 15 centroid is now closest to src. 14
[Tue May 28 21:03:34 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:34 2013] Assessing source extent using major
[Tue May 28 21:03:34 2013] Source does appear to be extended
[Tue May 28 21:03:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:03:44 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 21:03:44 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Tue May 28 21:03:44 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.021
[Tue May 28 21:03:44 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 13.93"
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14.csv
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14.csv
[Tue May 28 21:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May 28 21:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:56 2013] Spatial fit model total counts = 374.549000, observed total counts = 323.000000
[Tue May 28 21:03:56 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 21:03:56 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:56 2013] Assessing source extent using major
[Tue May 28 21:03:56 2013] Source does appear to be extended
[Tue May 28 21:03:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:04:11 2013] XMMSAS src. selection expression = ellipse(10752.664963, 16190.184875, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 21:04:11 2013] Not overwriting source region fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src.reg
[Tue May 28 21:04:11 2013] Extracting stamp from image fullrun_mos2_xmm0079570201_pi300-10000_cl_sm2.00.img.gz, (87, 149) - (162, 224)
[Tue May 28 21:04:11 2013] XMMSAS bgd. selection expression = annulus(10752.664963, 16190.184875, 1087.500000, 2175.000000, X, Y) && !ellipse(10104.454163, 17711.869781, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 21:04:11 2013] Writing fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16.gif
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Tue May 28 21:04:11 2013] Mean detx,y = (-16111.77, 3327.50) 
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src.img and ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Tue May 28 21:04:11 2013] Setting source spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May 28 21:04:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Tue May 28 21:09:26 2013] Not generating rmf since there are only 89 counts
[Tue May 28 21:09:26 2013] rmf not generated due to insufficient counts
[Tue May 28 21:10:52 2013] Updating aperture counts using extracted products
[Tue May 28 21:10:52 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 204.00
[Tue May 28 21:10:52 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 711.00
[Tue May 28 21:10:52 2013] Got source and background scale factors 1316770.000000, 4846029.000000
[Tue May 28 21:10:52 2013] User source parameters:
  Position = (124.2, 186.7) = 6 54 23.18 -23 49 28.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 10.8 +/- 15.3
  Background aperture counts = 193.2
  Rate = 0.0003 +/- 0.0004

[Tue May 28 21:10:52 2013] Updating counts from extracted products
[Tue May 28 21:10:52 2013] Set source signif. to 10.81/13.90 = 0.78
[Tue May 28 21:10:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 21:10:53 2013] Using photon index=1.80, rate=0.000295, arf fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16.arf
[Tue May 28 21:10:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 21:10:53 2013] Updating source flux to 9.2e-15
[Tue May 28 21:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 21:10:58 2013] xmm0079570201/analysis//spectral/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete