[Tue May 28 21:03:05 2013] Detection parameters: Position = (306.2, 261.5) = 6 53 25.47 -23 44 0.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 91.5 +/- 17.7 Background counts = 93.0 Rate = 0.002 +/- 0.0004 [Tue May 28 21:03:05 2013] Off-axis axis estimate = 2.73' [Tue May 28 21:03:22 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting [Tue May 28 21:03:22 2013] Initial guess for spatial extent in simple fitting = 7.80" [Tue May 28 21:03:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952 [Tue May 28 21:03:22 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.80" [Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13.ximg exists [Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13.csv [Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13_1.ximg exists [Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13.csv [Tue May 28 21:03:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Tue May 28 21:03:23 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Tue May 28 21:03:34 2013] Spatial fit model total counts = 423.995000, observed total counts = 424.000000 [Tue May 28 21:03:34 2013] Offset between fit and detection position for source 13 = 0.123183 pixels [Tue May 28 21:03:34 2013] 423.913000 total counts/ 373.237000 bgd. counts: snr = 2.623071 Spatial fit parameters: Offset between fit and detection position for source 13 = 0.123183 pixels Position = (306.3, 261.6) = 6 53 25.45 -23 44 1.7 Extent = 4.6 (3.3-6.9)", rotation angle = 0 Source counts = 50.7 +/- 20.6 Background counts = 373.2 Rate = 0.001 +/- 0.0006 [Tue May 28 21:03:34 2013] Vigneting correction estimate = 1.000000 [Tue May 28 21:03:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 28 21:03:34 2013] Assessing source extent using major axis lower bound [Tue May 28 21:03:34 2013] Source does appear to be extended [Tue May 28 21:03:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 28 21:03:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 28 21:03:44 2013] Initial guess for spatial extent in simple fitting = 4.62" [Tue May 28 21:03:44 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922 [Tue May 28 21:03:44 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 4.62" [Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12.ximg exists [Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12.csv [Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12_1.ximg exists [Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12.csv [Tue May 28 21:03:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Tue May 28 21:03:45 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Tue May 28 21:03:56 2013] Spatial fit model total counts = 423.996000, observed total counts = 424.000000 [Tue May 28 21:03:56 2013] Offset between fit and detection position for source 13 = 0.000778 pixels [Tue May 28 21:03:56 2013] 423.915500 total counts/ 373.193000 bgd. counts: snr = 2.625632 Spatial fit parameters: Offset between fit and detection position for source 13 = 0.000778 pixels Position = (306.3, 261.6) = 6 53 25.45 -23 44 1.7 Extent = 4.6 (3.3-6.9)", rotation angle = 0 Source counts = 50.7 +/- 20.6 Background counts = 373.2 Rate = 0.001 +/- 0.0006 [Tue May 28 21:03:56 2013] Vigneting correction estimate = 1.000000 [Tue May 28 21:03:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 28 21:03:56 2013] Assessing source extent using major axis lower bound [Tue May 28 21:03:56 2013] Source does appear to be extended [Tue May 28 21:03:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 28 21:04:11 2013] XMMSAS src. selection expression = ellipse(26597.259600, 22711.811600, 277.636808, 277.636808, 0.000000, X, Y) [Tue May 28 21:04:11 2013] Not overwriting source region fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src.reg [Tue May 28 21:04:11 2013] Extracting stamp from image fullrun_mos2_xmm0079570201_pi300-10000_cl_sm2.00.img.gz, (290, 246) - (322, 278) [Tue May 28 21:04:11 2013] XMMSAS bgd. selection expression = annulus(26597.259600, 22711.811600, 462.728013, 925.456027, X, Y) [Tue May 28 21:04:11 2013] Writing fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13.gif [Tue May 28 21:04:11 2013] ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create [Tue May 28 21:04:11 2013] Mean detx,y = (908.07, 1640.89) [Tue May 28 21:04:11 2013] ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src.img and ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create [Tue May 28 21:04:11 2013] ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create [Tue May 28 21:04:11 2013] Setting source spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Tue May 28 21:04:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.pi.gz [Tue May 28 21:04:11 2013] ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create [Tue May 28 21:09:21 2013] Not generating rmf since there are only 50 counts [Tue May 28 21:09:21 2013] rmf not generated due to insufficient counts [Tue May 28 21:10:52 2013] Updating aperture counts using extracted products [Tue May 28 21:10:52 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 96.00 [Tue May 28 21:10:52 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 380.00 [Tue May 28 21:10:52 2013] Got source and background scale factors 238400.000000, 1983612.000000 [Tue May 28 21:10:52 2013] User source parameters: Position = (306.3, 261.6) = 6 53 25.45 -23 44 1.7 Extent = 4.6 (3.3-6.9)", rotation angle = 0 Source aperture counts = 50.3 +/- 10.8 Background aperture counts = 45.7 Rate = 0.001 +/- 0.0003 [Tue May 28 21:10:53 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 28 21:10:53 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13.arf [Tue May 28 21:10:53 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 28 21:10:53 2013] Updating source flux to 2e-14 [Tue May 28 21:10:57 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting [Tue May 28 21:10:58 2013] xmm0079570201/analysis//spectral/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete